TDS · CHEL003
Technical Data Sheet – Sodium Carboxymethyl Inulin
Technical Data Sheet for Sodium Carboxymethyl Inulin, issued by Handymade.
- Product code
- CHEL003
- Date of issue
- 18 October 2026
- Status
- Validproduct document without time limit
01General identification data
| Parameter | Value |
|---|
| HS code | 39139000 |
| Country of origin | Italy |
| Grade | Technical Grade |
| Storage conditions | Store in a dry and clean environment, Protect from direct sunlight, Store in the original container |
02Formulation parameters
| Parameter | Value | Unit |
|---|
| Free from | EDTA | |
| Formulation phase | Water phase | |
| Function in formulation | Chelating agent, Water softener | |
| Compatibility | Anionic surfactants, Nonionic surfactants, Amphoteric surfactants, Electrolytes, Neutral pH, Alkaline pH | |
| Recommended dosage range | 0,1 – 2 % | % |
| Recommended formulation pH range | 6 – 11 | |
| Application | Household cleaning products, Laundry and fabric care, Dishes and kitchen | |
| Solubility | Water-soluble, Oil-insoluble | |
| Application type | Leave-on, Rinse-off | |
| Effects | Cleansing | |
03Sustainability and certifications
| Parameter | Value |
|---|
| Biodegradability | Inherently biodegradable (OECD 302) |
04Regulation and Safety
| Parameter | Value |
|---|
| Allergens | The product does not contain any of the fragrance allergens listed in Annex III of Regulation (EC) No. 1223/2009, as amended, including Commission Regulation (EU) 2023/1545. |
| BSE/TSE | The product does not contain materials of animal origin and, due to the absence of animal-derived materials and the production process, contamination or cross-contamination with BSE/TSE can be excluded. |
| CITES | The product is not derived from endangered species listed in the CITES Appendices and therefore does not require CITES certification. |
| Product CMR classification | The product is not classified as carcinogenic, mutagenic, or toxic to reproduction (CMR) according to Regulation (EC) No. 1272/2008. |
| Ethylene oxide | Ethylene oxide is not used in the production process of this product. |
| GMO | GMO-free product. |
| CLP classification | This substance is not classified as hazardous according to Regulation (EC) No 1272/2008 (CLP), and therefore a Safety Data Sheet (SDS) is not required for it under Article 31 of Regulation (EC) No 1907/2006 (REACH). |
| Microplastics (EU 2023/2055) | This product does not contain intentionally added synthetic polymer microparticles pursuant to Commission Regulation (EU) 2023/2055. |
| Nanomaterials | Nanomaterials are not used in, added to, or generated during the manufacturing of this product in accordance with Regulation (EC) No. 1223/2009. |
| CMR ingredient content | The product does not contain any ingredients classified as carcinogenic, mutagenic, or toxic to reproduction (CMR). |
| VOC content | Volatile organic compounds (VOC) are not expected to be present in the product. |
| Treatment with ionising radiation | The product has not been treated with ionising radiation at any stage before, during, or after the production process. |
| Parabens | The product is free from parabens. |
| Proposition 65 | None of the components of this product are listed on the California Proposition 65 list. |
| REACH status | The product is compliant with Regulation (EC) No. 1907/2006 (REACH). |
| Residual solvents | No residual solvents are used in or expected to remain from the production process of this product. |
| SVHC | The product is neither listed as a Substance of Very High Concern (SVHC) nor does it contain any material listed as an SVHC according to Article 59 of Regulation (EC) No. 1907/2006 (REACH). |
| Heavy metals | Relevant heavy metals are not expected to be present in the product above applicable limits. |
| Animal testing | The product has not been tested on animals for cosmetic purposes by or on behalf of the company. |
The information contained in this document is provided in good faith and to the best of our current knowledge. It is provided without warranty and does not constitute a guarantee of the product's suitability for any particular purpose.
The customer bears sole responsibility for verifying the suitability, safety and compliance of the product for the intended use and final application. Where necessary, appropriate tests should be carried out before use.
All information is considered accurate as at the date of issue; however, product data may change. We therefore recommend that customers keep their technical documentation up to date.
This document may not be reproduced, disclosed or distributed, in whole or in part, without the prior written consent of Handymade s.r.o.
