EU Declaration of Conformity (PPWR) · pdp.docShort_ppwr
Vrecko plastové ZVÁRACIE tenké, 30 x 50 cm, 0,04mm
EU Declaration of Conformity (PPWR) for Vrecko plastové ZVÁRACIE tenké, 30 x 50 cm, 0,04mm, issued by Handymade.
- Product code
- HMO_044
- Date of issue
- September 7, 2026
- Status
- Validproduct document without time limit
01Packaging identification data
| Parameter | Value |
|---|---|
| Material code (97/129/EC) | ldpe-4 |
| Position in the supply chain (PPWR) | Handymade s.r.o. is the manufacturer of the packaging under Article 3(1), point (13), of Regulation (EU) 2025/40 and issues this EU declaration of conformity. |
| Packaging category | sales packaging |
| Declaration of conformity number | HM-HMO_044-2026-R1 |
02Packaging parameters
| Parameter | Value | Unit |
|---|---|---|
| Diameter | 30x50 | mm |
| Height | 0,04 | mm |
| Weight | 11 | g |
| Product material | LDPE, Plastic |
03Legal references and conformity assessment
| Parameter | Value |
|---|---|
| Other Union acts applied | Regulation (EU) 2025/40 of the European Parliament and of the Council on packaging and packaging waste. Regulation (EC) No 1935/2004 on materials and articles intended to come into contact with food. Commission Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food. |
| Harmonised standards | As at the date of issue of this declaration, no harmonised standards or common specifications have been published in the Official Journal of the European Union in relation to Regulation (EU) 2025/40. Conformity is declared directly in relation to the requirements of that Regulation. |
| Notified body | Not applicable. The conformity assessment was carried out in accordance with Article 38 of Regulation (EU) 2025/40 following the procedure set out in Annex VII, without the involvement of a notified body. |
04Declaration of Conformity
| Parameter | Value |
|---|---|
| Suitability for contact with cosmetics | Based on the technical documentation for this packaging, we hereby declare that the packaging material is suitable for use with cosmetic products and complies with all relevant legal requirements, in particular: - Commission Regulation (EU) No 10/2011 of 14 January 2011 on plastic materials and articles intended to come into contact with food. - Regulation (EC) No 1223/2009 of the European Parliament and of the Council on cosmetic products. - Article 3 of Regulation (EC) No 1935/2004 of the European Parliament and of the Council on materials and articles intended to come into contact with food, applied by analogy to materials and packaging intended to come into contact with cosmetic products. The packaging material is stable under normal storage and usage conditions of cosmetic products and does not affect their sensory properties (fragrance, colour or texture). |
| Suitability for contact with food | Based on the technical documentation for this packaging, we hereby declare that the packaging material is suitable for direct contact with food under normal and foreseeable conditions of use and complies with the relevant legal requirements, in particular: - Regulation (EC) No 1935/2004 of the European Parliament and of the Council of 27 October 2004 on materials and articles intended to come into contact with food, in particular Article 3 thereof. - Commission Regulation (EU) No 10/2011 of 14 January 2011 on plastic materials and articles intended to come into contact with food, where applicable to the packaging material concerned. - Any applicable national provisions on materials and articles intended to come into contact with food. Under normal and foreseeable conditions of storage and use, the packaging material is stable and does not affect the sensory properties of food (odour, taste or colour), nor does it alter its composition in a way that could endanger human health or mislead the consumer. |
| Conformity with the PPWR (EU 2025/40) | Conformity with the requirements laid down in Articles 5 to 12 of Regulation (EU) 2025/40 that apply to this packaging as at the date of issue of this declaration has been demonstrated following the procedure set out in Article 38 and Annex VII. The sum of the concentration levels of lead, cadmium, mercury and hexavalent chromium originating from substances present in the packaging or packaging components does not exceed 100 mg/kg pursuant to Article 5(4). This declaration is kept up to date in accordance with Article 39(2). |
05Substances of concern
| Parameter | Value |
|---|---|
| PFAS below the PPWR limit | Compliant |
| Sum Pb + Cd + Hg + Cr(VI) max. 100 mg/kg | Compliant |
The packaging is identified by the product catalogue number stated above as another element allowing identification pursuant to Article 15(5) of Regulation (EU) 2025/40. This declaration of conformity is issued under the sole responsibility of the manufacturer.
This declaration relates to the conformity of the packaging with the legislation referred to above and does not constitute a warranty of the packaging's fitness for any particular purpose. The customer is responsible for verifying the suitability of the packaging for the intended use and final application, including compatibility with the filled contents; where necessary, appropriate tests should be carried out before use. This declaration is valid as at the date of issue and is kept up to date in accordance with Article 39(2) of Regulation (EU) 2025/40. The current version is identified by the declaration number and revision; upon any change to the packaging data, the previous revision ceases to be valid. This document may only be passed on in its complete and unaltered form. This document is signed with a qualified electronic signature, which has the same legal effect as a handwritten signature.
Data checksum (SHA-256):
282e3c39efae2d0acd4a931edfa0fd2bbc14fa28f4f42740f7887fc45177a097The PDF carries a qualified electronic signature; this page shows the same data.