PDS · HMO_O18SP010
Packaging Specification – Glass medicine bottle, 18 mm, clear, 10 ml
Packaging Specification for Glass medicine bottle, 18 mm, clear, 10 ml, issued by Handymade.
- Product code
- HMO_O18SP010
- Date of issue
- 30 October 2026
- Status
- Validproduct document without time limit
01General identification data
| Parameter | Value |
|---|---|
| HS code | 70109091 |
| Product colour | Clear |
| Country of origin | India |
| Grade | Cosmetic grade, Technical grade |
| Storage conditions | Store in a dry and clean environment |
02Packaging parameters
| Parameter | Value | Unit |
|---|---|---|
| Nominal capacity | 10 | ml |
| Brimful capacity | 15 | ml |
| Diameter | 27 | mm |
| Thread type | 18/410 | |
| Height | 59,5 | mm |
| Weight | 29 | g |
| Product material | Glass |
03Declaration of Conformity
| Parameter | Value |
|---|---|
| Conformity with the PPWR (EU 2025/40) | Conformity with the requirements laid down in Articles 5 to 12 of Regulation (EU) 2025/40 that apply to this packaging as at the date of issue of this declaration has been demonstrated following the procedure set out in Article 38 and Annex VII. The sum of the concentration levels of lead, cadmium, mercury and hexavalent chromium originating from substances present in the packaging or packaging components does not exceed 100 mg/kg pursuant to Article 5(4). This declaration is kept up to date in accordance with Article 39(2). |
All data and facts above are taken from the certificate provided by the manufacturer. This certificate confirms that the product meets all specified quality parameters and regulatory requirements. The information contained in this document is provided in good faith and to the best of our current knowledge. It is provided without warranty and does not constitute a guarantee of the product's suitability for any particular purpose. The customer bears sole responsibility for verifying the suitability, safety and compliance of the product for the intended use and final application. Where necessary, appropriate tests should be carried out before use. All information is considered accurate as at the date of issue; however, product data may change. We therefore recommend that customers keep their technical documentation up to date. This document may not be reproduced, disclosed or distributed, in whole or in part, without the prior written consent of Handymade s.r.o.