pdp.docShort_ppwr · HMO_O28SH500
EU Declaration of Conformity (PPWR) – Glass medicine bottle, 28 mm, 500 ml
EU Declaration of Conformity (PPWR) for Glass medicine bottle, 28 mm, 500 ml, issued by Handymade.
- Product code
- HMO_O28SH500
- Date of issue
- 5 October 2026
- Status
- Validproduct document without time limit
01Packaging identification data
| Parameter | Value |
|---|
| Material code (97/129/EC) | GL 72 |
| Declaration of conformity number | HM-HMO_O28SH500-2026-R1 |
| Packaging format | bottle |
| Packaging category | sales packaging |
| Position in the supply chain (PPWR) | Handymade s.r.o. is the manufacturer of the packaging under Article 3(1), point (13), of Regulation (EU) 2025/40 and issues this EU declaration of conformity. |
02Packaging parameters
| Parameter | Value | Unit |
|---|
| Nominal capacity | 500 | ml |
| Brimful capacity | 520 | ml |
| Diameter | 76,8 | mm |
| Thread type | PP28S | |
| Height | 176,8 | mm |
| Weight | 240 | g |
| Product material | Glass | |
03Legal references and conformity assessment
| Parameter | Value |
|---|
| Harmonised standards | As at the date of issue of this declaration, no harmonised standards or common specifications have been published in the Official Journal of the European Union in relation to Regulation (EU) 2025/40. Conformity is declared directly in relation to the requirements of that Regulation. |
| Other Union acts applied | Regulation (EU) 2025/40 of the European Parliament and of the Council on packaging and packaging waste. |
| Notified body | Not applicable. The conformity assessment was carried out in accordance with Article 38 of Regulation (EU) 2025/40 following the procedure set out in Annex VII, without the involvement of a notified body. |
04Declaration of Conformity
| Parameter | Value |
|---|
| Conformity with the PPWR (EU 2025/40) | Conformity with the requirements laid down in Articles 5 to 12 of Regulation (EU) 2025/40 that apply to this packaging as at the date of issue of this declaration has been demonstrated following the procedure set out in Article 38 and Annex VII. The sum of the concentration levels of lead, cadmium, mercury and hexavalent chromium originating from substances present in the packaging or packaging components does not exceed 100 mg/kg pursuant to Article 5(4). This declaration is kept up to date in accordance with Article 39(2). |
05Substances of concern
| Parameter | Value |
|---|
| PFAS below the PPWR limit | Not applicable |
| Sum Pb + Cd + Hg + Cr(VI) max. 100 mg/kg | Compliant |
The packaging is identified by the product catalogue number stated above as another element allowing identification pursuant to Article 15(5) of Regulation (EU) 2025/40. This declaration of conformity is issued under the sole responsibility of the manufacturer.
This declaration relates to the conformity of the packaging with the legislation referred to above and does not constitute a warranty of the packaging's fitness for any particular purpose. The customer is responsible for verifying the suitability of the packaging for the intended use and final application, including compatibility with the filled contents; where necessary, appropriate tests should be carried out before use. This declaration is valid as at the date of issue and is kept up to date in accordance with Article 39(2) of Regulation (EU) 2025/40. The current version is identified by the declaration number and revision; upon any change to the packaging data, the previous revision ceases to be valid. This document may only be passed on in its complete and unaltered form. This document is signed with a qualified electronic signature, which has the same legal effect as a handwritten signature.
