TDS · MH108_10
Technical Data Sheet – ZENISOAPBASE Melt & Pour, Shea-W, 10 kg
Technical Data Sheet for ZENISOAPBASE Melt & Pour, Shea-W, 10 kg, issued by Handymade.
- Product code
- MH108_10
- Date of issue
- 1 November 2026
- Status
- Validproduct document without time limit
01General identification data
| Parameter | Value |
|---|
| HS code | 34012090 |
| Country of origin | European Union |
| Processing method | Saponification |
| Storage conditions | Protect from direct sunlight, Store at room temperature, Protect from moisture, Keep container tightly closed |
02Formulation parameters
| Parameter | Value |
|---|
| Function in formulation | Foaming agent, Surfactant |
| Application area | Body, Hands |
| Application | Soaps |
| Solubility | Water-soluble |
| Application type | Rinse-off |
03Regulation and Safety
| Parameter | Value |
|---|
| Allergens | The product does not contain any of the fragrance allergens listed in Annex III to Regulation (EC) No 1223/2009, as amended, including Commission Regulation (EU) 2023/1545. |
| CITES | The product is not derived from endangered species listed in the CITES Appendices and therefore does not require CITES certification. |
| Microplastics (EU 2023/2055) | This product does not contain intentionally added synthetic polymer microparticles pursuant to Commission Regulation (EU) 2023/2055. |
| Parabens | The product is free from parabens. |
04Additional information
| Parameter | Value |
|---|
| Composition | Glycerin 25–50 %, Aqua 10–25 %, Sodium Stearate 10–25 %, Propylene Glycol 5–10 %, Sodium Laurate 5–10 %, Sorbitol 5–10 %, Sodium Laureth Sulfate 5–10 %, Sodium Shea Butterate 1–5 %, Sodium Chloride 0,5–1 %, Disodium Laureth Sulfosuccinate 0,5–1 %, Titanium Dioxide < 0,1 %, Tetrasodium EDTA < 0,1 % |
The information contained in this document is provided in good faith and to the best of our current knowledge. It is provided without warranty and does not constitute a guarantee of the product's suitability for any particular purpose.
The customer bears sole responsibility for verifying the suitability, safety and compliance of the product for the intended use and final application. Where necessary, appropriate tests should be carried out before use.
All information is considered accurate as at the date of issue; however, product data may change. We therefore recommend that customers keep their technical documentation up to date.
This document may not be reproduced, disclosed or distributed, in whole or in part, without the prior written consent of Handymade s.r.o.
