PDS · O24PH300

Packaging Specification – Brown plastic bottle, 24/410, 300 ml

Packaging Specification for Brown plastic bottle, 24/410, 300 ml, issued by Handymade.

Product code: O24PH300
Date of issue: 5 October 2026
Status: Validproduct document without time limit

01General identification data

Parameter	Value
HS code	39233010
Product color	Amber
Country of origin	European Union
Grade	Cosmetic Grade, Technical Grade
Storage conditions	Store in a dry and clean environment, Protect from direct sunlight, Store at 5–30 °C, Protect from heat, Do not expose to aggressive chemicals

02Packaging parameters

Parameter	Value	Unit
Nominal capacity	300	ml
Brimful capacity	317	ml
Diameter	58	mm
Thread type	24/410
Height	146	mm
Weight	24	g
Product material	PET, Plastic

03Declaration of Conformity

Parameter	Value
Conformity with the PPWR (EU 2025/40)	Conformity with the requirements laid down in Articles 5 to 12 of Regulation (EU) 2025/40 that apply to this packaging as at the date of issue of this declaration has been demonstrated following the procedure set out in Article 38 and Annex VII. The sum of the concentration levels of lead, cadmium, mercury and hexavalent chromium originating from substances present in the packaging or packaging components does not exceed 100 mg/kg pursuant to Article 5(4). This declaration is kept up to date in accordance with Article 39(2).

Parameter

Value

Conformity with the PPWR (EU 2025/40)

Conformity with the requirements laid down in Articles 5 to 12 of Regulation (EU) 2025/40 that apply to this packaging as at the date of issue of this declaration has been demonstrated following the procedure set out in Article 38 and Annex VII. The sum of the concentration levels of lead, cadmium, mercury and hexavalent chromium originating from substances present in the packaging or packaging components does not exceed 100 mg/kg pursuant to Article 5(4). This declaration is kept up to date in accordance with Article 39(2).

All data and facts above are taken from the certificate provided by the manufacturer. This certificate confirms that the product meets all specified quality parameters and regulatory requirements. The information contained in this document is provided in good faith and to the best of our current knowledge. It is provided without warranty and does not constitute a guarantee of the product's suitability for any particular purpose. The customer bears sole responsibility for verifying the suitability, safety and compliance of the product for the intended use and final application. Where necessary, appropriate tests should be carried out before use. All information is considered accurate as at the date of issue; however, product data may change. We therefore recommend that customers keep their technical documentation up to date. This document may not be reproduced, disclosed or distributed, in whole or in part, without the prior written consent of Handymade s.r.o.