PDS · O25PP002
Packaging Specification – Clear Plastic Jar, Square, transparent 3 ml
Packaging Specification for Clear Plastic Jar, Square, transparent 3 ml, issued by Handymade.
- Product code
- O25PP002
- Date of issue
- 17 October 2026
- Status
- Validproduct document without time limit
01General identification data
| Parameter | Value |
|---|---|
| HS code | 39233010 |
| Product color | Transparent |
| Country of origin | China |
| Grade | Cosmetic Grade, Technical Grade |
| Storage conditions | Store in a dry and clean environment |
02Packaging parameters
| Parameter | Value | Unit |
|---|---|---|
| Nominal capacity | 3 | ml |
| Brimful capacity | 4,8 | ml |
| Diameter | 30 | mm |
| Thread diameter | 26,3 | mm |
| Height | 16,8 | mm |
| Weight | 5 | g |
| Product material | PS, Plastic |
03Declaration of Conformity
| Parameter | Value |
|---|---|
| Suitability for contact with cosmetics | Based on the technical documentation for this packaging, we hereby declare that the packaging material is suitable for use with cosmetic products and complies with all relevant legal requirements, in particular: - Commission Regulation (EU) No 10/2011 of 14 January 2011 on plastic materials and articles intended to come into contact with food. - Regulation (EC) No 1223/2009 of the European Parliament and of the Council on cosmetic products. - Article 3 of Regulation (EC) No 1935/2004 of the European Parliament and of the Council on materials and articles intended to come into contact with food, applied by analogy to materials and packaging intended to come into contact with cosmetic products. The packaging material is stable under normal storage and usage conditions of cosmetic products and does not affect their sensory properties (fragrance, colour or texture). |
All data and facts above are taken from the certificate provided by the manufacturer. This certificate confirms that the product meets all specified quality parameters and regulatory requirements. The information contained in this document is provided in good faith and to the best of our current knowledge. It is provided without warranty and does not constitute a guarantee of the product's suitability for any particular purpose. The customer bears sole responsibility for verifying the suitability, safety and compliance of the product for the intended use and final application. Where necessary, appropriate tests should be carried out before use. All information is considered accurate as at the date of issue; however, product data may change. We therefore recommend that customers keep their technical documentation up to date. This document may not be reproduced, disclosed or distributed, in whole or in part, without the prior written consent of Handymade s.r.o.