Ludivine D.29 Sept 2026
Scent: Plastová pumpička, čierna 28 mm, na sklenené liekovky
Very good quality
Translated automatically
Closures DIN28
Plastic pump, black, 28 mm, for glass bottles
Plastic pump, black 28 mm The plastic pump is a mechanical dispenser that turns a glass bottle into a practical container for everyday dispensing of liquid and mildly viscous products. full description
In stock · 412 ks
OVD28PC2
€0.62incl. VAT
Lowest price in the last 30 days: €0.62
Product description
Plastic pump, black 28 mm
The plastic pump is a mechanical dispenser that turns a glass bottle into a practical container for everyday dispensing of liquid and mildly viscous products. When the head is pressed, the dip tube draws the contents from the bottom of the bottle and delivers a measured dose (approximately 1.8 ml per press), so the product is dispensed cleanly, without spilling and without unnecessary contact with fingers. It is particularly suitable for oils, serums, tonics, liquid soaps and lighter emulsions, where it is convenient to take a small amount at a time.
The black head looks understated and pairs well with most labels as well as amber or clear glass. The long dip tube reaches all the way to the bottom of taller bottles, so virtually all of the contents can be emptied.
Key features
- Measured dose – each press releases the same small amount, making it easy to dispense serums or oils consistently.
- Long dip tube – reaches the bottom of the bottle and allows almost all of the contents to be used; can be trimmed to the height of a shorter bottle.
- Plastic construction – lightweight and break-resistant, suitable for everyday use and travel.
- 28 mm thread (PP28S) – fits bottles with the same neck type; verify the bottle's thread type in its specifications.
Use in formulation
The pump is suitable for liquid to medium-viscosity contents – vegetable oils, oil blends, serums, tonics, hydrophilic oils or liquid soaps. With thicker creams, gels and high-viscosity products the system may not draw reliably, so an airless dispenser or a different closure type is more appropriate for those.
When selecting, follow the neck type: the pump fits glass bottles with a 28 mm (PP28S) neck. Closures with the same neck type and ready-made bottle + pump combinations are available in the Handymade range; for a custom combination, we recommend checking the seal, dispensing and compatibility with your specific formulation.
Before first use, trim the dip tube to the height of the bottle – cut it at an angle so it reaches the bottom without pressing against it. Once the pump is fitted, press it several times to "prime" it until it begins dispensing fully.
Good to know
Before first filling, wash the container and pump, or disinfect with isopropyl alcohol or ethanol and allow to dry thoroughly. Once emptied, the pump can be reused – rinse it with lukewarm water; for oily residues a brief rinse with alcohol will help prevent the dip tube from clogging.
The packaging material is suitable for contact with cosmetic products. It is not intended for food use.
Once thoroughly emptied, the pump plastic belongs in the sorted plastics collection.
For products with a higher proportion of essential oils, fragrance components or solvents, verify the plastic compatibility and seal integrity in the finished formulation – some strongly solvent components may over time affect the plastic parts and the seal.
Frequently asked questions
What bottles does the 28 mm plastic pump fit?
It fits glass bottles with a PP28S 28 mm neck. The decisive factor is the bottle's thread type, which you can find in its specifications – if it matches, the pump will seat tightly. Ready-made bottle + pump combinations are also available directly in the Handymade range.
How much product does one press deliver?
One press releases approximately 1.8 ml. The dose is measured and consistent with each press, which is convenient for serums and oils where only a small amount is needed. The actual output varies slightly depending on the viscosity of the contents.
Is the pump suitable for oil-based products?
Yes, it is suitable for liquid oils and oil serums and draws them well. For products with a high proportion of essential oils or solvents, we recommend checking plastic compatibility and the seal in advance, as some components may affect the plastic parts over time.
Why doesn't the pump dispense immediately after fitting?
The pump first needs to "prime" the system. After fitting, press it several times without product until the contents rise through the dip tube into the head and it begins dispensing fully. This is normal behaviour for mechanical pumps, not a fault.
Can the pump be reused?
Yes, once emptied it can be cleaned and used again. Rinse it with lukewarm water; for oily or fragrant residues, briefly rinse with alcohol and allow to dry. This prevents the dip tube from clogging and ensures the next contents are not contaminated by residues from the previous one.
Parameters
- Product color
- Black
- Country of origin
- European Union
- Diameter
- 31 mm
- Thread type
- PP28S
- Height
- 39,3 mm
- Tube length
- 235 mm
- Dose
- 1.8 ml
Product documentation
- PDSProduct Data Sheet
- PDF ↓