+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

PLASTIC JARS

Clear Plastic Jar, Blue Lid, 10 ml

The clear 10 ml jar with a blue screw lid is designed for small amounts of solid and semi-solid cosmetics: cream samples, lip balms, solid perfumes or eye creams. full description

AvailabilityIn stock · 156 pcs
Product codeO37PP010-OVV37PM
€0.47incl. VAT

Lowest price in the last 30 days: €0.47

Save €0.51 with this set

Volume pricing
1–199 pcs€0.47Your price
200–999 pcs€0.43−8 %
1000–4999 pcs€0.40−15 %
from 5000 pcs€0.35−25 %

Total for 1 pcs: €0.47

Quantities add up across all combinations of this bottle.

Product description

The clear 10 ml jar with a blue screw lid is designed for small amounts of solid and semi-solid cosmetics: cream samples, lip balms, solid perfumes or eye creams. The clear polystyrene wall shows both the colour and the texture of the contents. The blue lid makes the jar easy to tell apart when you have several different products side by side.

The set consists of two parts made of the same material, a jar and a threaded lid, and they are supplied together. There is no need to look for a closure that matches the neck type. Both parts are declared suitable for contact with cosmetics.


What the jar is suitable for

  • Cream and mask samples – a trial amount that the customer uses up within a few days and does not need to store for long.
  • Lip balms and solid perfumes – the melted mixture is poured directly into the jar, sets in it and is applied with a finger.
  • Balms for small areas – the eye area, cuticles, lips.
  • Pigments and loose samples – a small amount of eyeshadow, glitter or mineral powder for trying out a shade.
  • Travel and gift sets – several fragrances or shades in the same packaging, and you can tell the shades apart at a glance through the clear wall.

Filling and volume

The nominal volume of 10 ml is the volume the jar is designed for with normal filling. The brimful volume is the physical volume up to the top edge of the wall. The difference is a reserve for the lid. Fill the jar up to the nominal volume. If you fill it to the brim, the product is pushed into the thread when the lid is screwed on and the lid then does not seat properly.

Do not pour a melted balm or solid perfume into the jar straight from the heat. Let the mixture cool slightly first, while it is still liquid. Screw on the lid only after it has set, so that moisture does not condense under it.


Good to know

Polystyrene is a hard, clear plastic. It may crack if dropped on a hard floor. It does not tolerate high temperatures, so it is not suitable for hot filling or for storage near a heat source.

The clear wall does not protect the contents from light. Store formulations containing light-sensitive ingredients, for example some vegetable oils or vitamins, in a box or out of direct sunlight.

Polystyrene is sensitive to some essential oils and solvents. They can cloud or soften the wall or cause cracks. For formulations with a higher proportion of essential oils or alcohol, check compatibility on a single piece and observe the jar for several days.

Before the first filling, wash and disinfect both the jar and the lid and let them dry completely. Once the contents have been used up, both parts can be washed and used again. When reusing them, check the thread and whether the lid still seats properly.

The jar and the lid are made of one material, polystyrene. The set is intended for cosmetics. It is not approved for contact with food, so it is not suitable for spices, syrups or other foods.


Frequently asked questions

How much fits into a 10 ml plastic jar?
With normal filling, 10 ml, which corresponds to the nominal volume. The physical volume up to the brim is slightly larger, but this space serves as a reserve for the lid. If you fill the jar to the brim, the product gets into the thread when the lid is screwed on and the lid does not seat properly.
Is a clear 10 ml jar suitable for lip balm?
Yes, 10 ml is a common size for a lip balm that is applied with a finger. Let the melted mixture cool slightly before pouring, because polystyrene does not tolerate high temperatures. Screw on the lid only after the balm has set completely, otherwise moisture condenses under it and droplets form on the surface of the balm.
Does a clear plastic jar protect the contents from light?
No, the clear wall does not block light. The advantage is that the customer can see the colour and texture of the contents. Store formulations containing light-sensitive ingredients, for example unsaturated vegetable oils or vitamins, in a box or out of direct sunlight.
Can a plastic jar with a blue lid be reused?
Yes, once it is empty, wash it, disinfect it and let it dry. Before the next filling, check that the thread is intact and the lid seats properly. If the wall is cloudy or cracked, it is better to discard the jar.
Can I fill a polystyrene jar with a product containing essential oils?
With a low proportion of essential oils, as is usual in balms and solid perfumes, generally yes, but we recommend checking compatibility. Polystyrene is sensitive to some essential oils and solvents, which can cloud or soften the wall. Fill one jar and watch it for several days to see whether the material changes.

Parameters

Clear Plastic Jar, 10 ml

Product colour
Clear
Country of origin
China
Nominal capacity
10
Brimful capacity
13 ml
Diameter
38 mm
Height
20 mm
Product material
PSPlastic

Blue Plastic Lid, 37mm

Product colour
Blue
Country of origin
China
Diameter
37 mm
Thread diameter
33,5 mm
Height
8,8 mm
Product material
PSPlastic

Product documentation

PDSProduct Data Sheet
Clear Plastic Jar, 10 ml · O37PP010PDF ↓
Blue Plastic Lid, 37mm · OVV37PMPDF ↓
Download all (ZIP)

2 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.