PDS · O50PB5500

Packaging Specification – Plastic bottle for fabric softener, white, 5.5 L

Packaging Specification for Plastic bottle for fabric softener, white, 5.5 L, issued by Handymade.

Product code: O50PB5500
Date of issue: 29 October 2026
Status: Validproduct document without time limit

01General identification data

Parameter	Value
HS code	39233010
Product colour	White

02Packaging parameters

Parameter	Value	Unit
Diameter	194 x 130	mm
Height	366,8	mm
Weight	180	g
Product material	HDPE, Plastic

03Declaration of Conformity

Parameter	Value
Conformity with the PPWR (EU 2025/40)	Conformity with the requirements laid down in Articles 5 to 12 of Regulation (EU) 2025/40 that apply to this packaging as at the date of issue of this declaration has been demonstrated following the procedure set out in Article 38 and Annex VII. The sum of the concentration levels of lead, cadmium, mercury and hexavalent chromium originating from substances present in the packaging or packaging components does not exceed 100 mg/kg pursuant to Article 5(4). This declaration is kept up to date in accordance with Article 39(2).

Parameter

Value

Conformity with the PPWR (EU 2025/40)

Conformity with the requirements laid down in Articles 5 to 12 of Regulation (EU) 2025/40 that apply to this packaging as at the date of issue of this declaration has been demonstrated following the procedure set out in Article 38 and Annex VII. The sum of the concentration levels of lead, cadmium, mercury and hexavalent chromium originating from substances present in the packaging or packaging components does not exceed 100 mg/kg pursuant to Article 5(4). This declaration is kept up to date in accordance with Article 39(2).

All data and facts above are taken from the certificate provided by the manufacturer. This certificate confirms that the product meets all specified quality parameters and regulatory requirements. The information contained in this document is provided in good faith and to the best of our current knowledge. It is provided without warranty and does not constitute a guarantee of the product's suitability for any particular purpose. The customer bears sole responsibility for verifying the suitability, safety and compliance of the product for the intended use and final application. Where necessary, appropriate tests should be carried out before use. All information is considered accurate as at the date of issue; however, product data may change. We therefore recommend that customers keep their technical documentation up to date. This document may not be reproduced, disclosed or distributed, in whole or in part, without the prior written consent of Handymade s.r.o.