Clear Plastic Jar, Black Lid, 10 ml

The jar can be used repeatedly if basic hygiene rules are followed. Before each new filling, the packaging needs to be thoroughly cleaned and disinfected, ideally with alcohol-based disinfectants such as isopropyl alcohol or ethanol. For disinfection you can use, for example, the products IPA 99 % isopropyl alkohol or Etanol 96 % denaturovaný rastlinný. Make sure the inner surface is completely dry before filling so that the stability of the formula is not compromised.

Yes, the jar is also suitable for thick and waxy formulations such as balms, butters, ointments, or concentrated cream products. For dense textures it is important to fill at an appropriate temperature so that the mass is not too hot and at the same time can be spread and smoothed comfortably. After filling, we recommend checking the closure of the lid to ensure the best possible protection against drying out and contamination.

First remove any product residues mechanically using a spatula or paper towel. Then wash the jar in lukewarm water with a mild detergent and rinse well. After washing, it is advisable to disinfect the inner surface and lid with an alcohol-based disinfectant, for example with the products IPA 99 % isopropyl alkohol or Etanol 96 % denaturovaný rastlinný. Avoid prolonged exposure to very hot water and aggressive cleaning agents, which could shorten the service life of the plastic.

Always store the filled jar well closed, in a dry and clean environment, away from direct sunlight and sources of heat. A more stable room temperature helps maintain the properties of the cosmetic product as well as the packaging itself. Do not expose the packaging to a very humid environment for a long time, in order to minimise the risk of condensation and contamination of the threaded part of the lid. For transport we recommend placing the jars so as to prevent mechanical pressure on the lids.

If you decide not to use the jar any further, we recommend recycling it according to the type of plastic stated in the parameter table for the product. Before disposal, remove any remaining contents, rinse the packaging, and separate the individual parts (body and lid) according to local waste sorting rules. In this way you will support efficient processing of the material in the recycling process and reduce the amount of mixed waste.

The simplest way to choose suitable packaging is to use the advanced filter in the packaging material categories. After clicking on the chosen category, the advanced filter is located at the top of the page and allows searching by several parameters at once – you can select the neck type, required size, colour, and packaging material. By combining these filters you can quickly narrow down the offer to the packs that best correspond to your formulation, dosing method, and the visual style of your brand.