Plastic trigger sprayer, 24/410, white, smooth collar

Plastic trigger sprayer 24/410

This polypropylene trigger sprayer threads onto bottles with a 24/410 neck finish; pressing the trigger delivers the contents as a spray stream. It is suited wherever you need to apply a larger volume of liquid evenly over a surface — for cleaning and surface products, household and technical solutions, or plant preparations. The trigger mechanism dispenses more liquid per stroke than a fine pump sprayer, making it more practical for frequent and large-area application.

Compared to a pump sprayer, which produces a fine mist suited to tonics and facial sprays, the trigger sprayer is designed for a more generous dose and larger volumes.

Key features

• Trigger dispensing – pressing the lever produces a spray stream; suitable for surface and repeated application, not for fine facial mist.
• 24/410 thread – the sprayer fits bottles with this neck type; verify the thread size in the bottle specifications.
• Dip tube – draws liquid from the bottom of the bottle to the mechanism, so it works best with taller bottles; for shorter or wider bottles we recommend trimming the tube so it reaches the bottom.
• Polypropylene material – a durable, lightweight plastic suited primarily for aqueous and water-alcohol solutions.

Good to know

Before first use, rinse the sprayer and disinfect if needed with isopropyl alcohol or ethanol, then let it dry thoroughly. After threading onto the bottle, prime the mechanism with several strokes until the dip tube and pump are filled and dispensing stabilises.

After use, especially with thicker or drying solutions, flush the mechanism with clean water to prevent nozzle blockage. Based on the technical documentation, this packaging is suitable for use with cosmetic products.

Closure selection and combinations

The sprayer fits bottles with the same neck type listed in the specifications (24/410); ready-made bottle and sprayer combinations are available in the Handymade range. For your own combination with a specific bottle and formulation, we recommend verifying the seal, dispensing flow, and compatibility of the packaging with the intended contents.

Frequently asked questions