ALUMINUM JARS
Aluminium jar with lid, 92 mm, 200 ml
An aluminium tin with a screw lid for 200 ml of content is a packaging option for body butters, balms, solid deodorants and scrubs, and at the same time a container for container candles . full description
Lowest price in the last 30 days: €2.49
Total for 1 pcs: €2.49
Product description
An aluminium tin with a screw lid for 200 ml of content is a packaging option for body butters, balms, solid deodorants and scrubs, and at the same time a container for container candles. The inside of the tin is coated with an epoxy layer, so the contents do not come into direct contact with the aluminium and do not react with it. The silver metal wall blocks light, which helps with products containing vegetable oils, butters and essential oils, which oxidise more quickly when exposed to light.
According to the technical documentation, the packaging is suitable for contact with cosmetic products; you will find the declaration of conformity in the product parameters.
What the tin is suitable for
- Body butters and balms – the wide opening allows comfortable scooping with fingers or a spatula, and the lid screws back on easily after each use.
- Ointments, solid deodorants and hair or beard waxes – anhydrous formulations hold their shape well in the tin, and the epoxy layer separates the contents from the metal.
- Salt and sugar scrubs – the metal does not absorb oil; once emptied, the tin can be washed and refilled.
- Solid shampoos and conditioners – the tin serves as a travel container into which the solid bar is placed after use and sealed.
- Container candles – wax is poured directly into the tin; once it has burned down, the container is cleaned and reused.
Filling and volume
The tin is filled to the nominal volume, i.e. the volume for which the packaging is intended under normal filling conditions. The total volume to the brim is slightly larger; the difference provides clearance for the lid and for expansion of the contents when the temperature changes. With butters and balms, bear in mind that the mass may shrink slightly as it solidifies or a depression may form on the surface, which is why filling is sometimes done in two steps. Both volume values are stated in the parameters.
Pour solid products with a high proportion of butters and waxes into the tin while hot and leave to set with the lid open. Screw the lid on only once the contents have cooled completely; otherwise condensation forms underneath it.
The lid has an expanded polyethylene (EPE) insert on the inside that rests on the rim of the tin and seals the joint. For solid and semi-solid contents, the seal is sufficient. With thin oils or liquid emulsions, test the seal with your specific formulation in advance, especially if the packaging will be transported on its side.
Use for candles
Standard container wax — soy, coconut, rapeseed or paraffin — is poured into the tin. A wick with a sustainer tab is glued to the bottom before pouring, and the wax is poured at the temperature recommended by the wax manufacturer. Wick thickness is chosen according to the diameter of the container, which is stated in the parameters. The metal wall conducts heat better than glass, and the tin warms up around its entire circumference during burning, so place the candle on a heat-resistant surface. A correctly chosen wick will melt the wax all the way to the walls, preventing tunnelling, i.e. the candle burning only in the centre. Once the candle has burned down, the lid protects the remaining wax from dust and keeps the scent inside the container.
Never let a candle in a metal tin burn all the way down to the bottom. When the remaining wax layer is less than approximately one centimetre, the flame approaches the bottom and the container overheats.
What is worth knowing
- Preparation before first filling – wipe the inside with a clean cloth, disinfect with isopropyl alcohol or ethanol and leave to dry completely. Moisture trapped in an anhydrous product shortens its shelf life.
- Epoxy layer – do not use wire wool or abrasive cleaners when washing, to avoid scratching the protective coating. Warm water, washing-up liquid and a soft cloth are sufficient.
- Repeated use – the tin withstands many filling and washing cycles. The lid insert may compress over time, so when reusing, check that the lid seats evenly.
- Labelling – the smooth silver surface holds self-adhesive labels well; apply them to a dry, degreased surface.
- Heat and frost – aluminium handles temperature changes without cracking, which is useful for products sent by post as well as for candles.
- Recycling – aluminium recycles well; before disposing of the tin, simply empty it and remove any residual contents.
Frequently asked questions
Parameters
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
