Closures DIN28
Black All-Plastic Trigger Sprayer, 28/410
The lever pump sprayer with a 28/410 thread is a dispensing closure for larger bottles, from which the contents are applied by spraying onto a surface or into a space. full description
Lowest price in the last 30 days: €0.88
Total for 1 pcs: €0.88
Product description
The lever pump sprayer with a 28/410 thread is a dispensing closure for larger bottles, from which the contents are applied by spraying onto a surface or into a space. It is suitable for water-based and thin solutions – household cleaning and disinfecting products, fabric and air fresheners, hydrosol body mists, ironing water, and plant sprays. The lever operated with the whole hand delivers more product at once than a small finger-pump sprayer, so it is used where spraying is frequent or over a larger area.
The sprayer is all-plastic, made of polypropylene (PP), in a black finish. The black colour conceals the contents of the dip tube and mechanism, so the finished product looks uniform even on a clear bottle. The all-plastic construction means the contents do not come into contact with metal parts. The packaging is also suitable for use with cosmetic products.
What the lever sprayer is suitable for
- Cleaning and disinfecting preparations – solutions for surfaces, bathroom and kitchen, vinegar and alcohol-based cleaners. The sprayer is designed for these preparations and carries a technical-grade designation.
- Cosmetic water-based preparations – body mists from hydrosols, refreshing sprays and hair waters with low viscosity, where a more generous output than a fine mist sprayer is desired.
- Household and garden – ironing water, fabric fresheners, plant misting, water-based repellent sprays.
- Larger containers – the 28/410 thread is commonly used on higher-volume bottles, for which small sprayers with a narrower neck are too weak.
How the sprayer works and what it handles
The lever pump sprayer draws the contents through a dip tube from the bottom of the bottle and, when the lever is pressed, pushes them through the nozzle. The volume of a single dose is listed in the parameters; normal use typically requires several presses per treatment of a surface.
It works best with liquids close to water viscosity. The thicker the preparation, the harder it is to draw up and atomise. Slightly thickened solutions may come out as a stream instead of a mist; thick gels and emulsions cannot be processed by the sprayer. Preparations with undissolved particles (herb residues, sediment, solid components) clog the nozzle, so filter them before filling.
The dip tube is supplied at full length to fit even tall bottles. Before fitting, cut it at an angle so that it ends just above the bottom of the bottle. The sprayer will then draw up to the very last of the contents, and the tube will not bend when screwed on.
Polypropylene tolerates water-based solutions, diluted alcohol, common surfactants and vinegar-based cleaners well. For preparations with a high content of essential oils, solvents, or more aggressive technical chemicals, we recommend verifying compatibility on a single unit. Monitor tightness, lever action and the condition of the seal after several weeks.
Bottle selection and filling
The sprayer fits bottles with a 28/410 neck. The neck type is listed in the parameters of each bottle, and you can find both bottles and ready-made bottle + sprayer combinations in the Handymade range. When making your own combination, we recommend verifying the tightness and behaviour of the assembly with your specific formulation.
The bottle is filled to its nominal volume, not to the brim. The nominal volume is the quantity the bottle is designed for under normal filling. The space above it up to the neck is reserved for the dip tube and sprayer mechanism and for expansion of the contents. An overfilled bottle will overflow when the sprayer is screwed on, or the contents will be pushed out through the tube.
Good to know
- Before first use – rinse the sprayer with clean water; for cosmetic preparations, disinfect it with alcohol or isopropyl alcohol and allow it to dry completely. The first few presses after filling will be empty while the tube fills up.
- Reuse – once the contents have been sprayed out, flush the sprayer by spraying clean water through it. When changing the contents (e.g. from a cleaner to a cosmetic preparation), a new unit is recommended.
- Not for everything – not suitable for oils and oil serums, thick emulsions, or preparations with solid particles.
- Labelling – the sprayer has no surface for a label; labelling belongs on the bottle. The black finish does not interfere with printing or labels.
- Recycling – the polypropylene product with material code PP 5 should be placed with plastics after the contents have been sprayed out and the sprayer has been rinsed.
Alcohol and disinfectant preparations must be labelled after filling and the bottle must be kept out of reach of children. The lever pump sprayer is not a child-resistant closure.
Frequently asked questions
Parameters
- Product colour
- Black
- Country of origin
- European Union
- Diameter
- 91,9 x 32,3 mm
- Thread type
- 28/410
- Height
- 63 mm
- Tube length
- 295 mm
- Dose
- 1,3 ml
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
