+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

Closures DIN18

Black Fine Mist Sprayer, Black Overcap, 18/415, 100 pieces

This plastic fine mist sprayer with an 18 mm thread turns a bottle into a spray that delivers a fine mist. full description

AvailabilityPre-order
Product codeOVR18PC3_100
€35.70incl. VAT

Lowest price in the last 30 days: €35.70

Save €3.30 with this set

Expected back in stock: 30 Nov.This variant is currently out of stock — your order will be a pre-order and delivery may take longer.

Product description

This plastic fine mist sprayer with an 18 mm thread turns a bottle into a spray that delivers a fine mist. It is suitable for water-based and alcohol-based liquids that are applied by spraying onto the skin, hair or a surface: facial toners, hydrolates, refreshing mists, eau de parfum or hair sprays. The black top looks neutral and matches clear, amber and blue glass as well as plastic bottles. The pack contains 100 pcs, so it is intended mainly for makers who fill larger batches.

The body of the sprayer is made of polypropylene (PP). The dip tube can be shortened before fitting to match the height of the bottle. The material is suitable for use with cosmetic products, and the declaration of conformity is available with the product.


What the sprayer is suitable for

  • Toners and hydrolates – thin water-based liquids spread evenly over the skin without running off, which you cannot achieve when applying from the palm of your hand.
  • Eau de parfum and eau de toilette – alcohol-based fragrance solutions are the typical contents for this size of sprayer, and a small dose is enough for one application.
  • Hair sprays and mists – light products without an oil content and without thickeners are sprayed as a fine mist.
  • Fresheners and technical solutions – alcohol solutions for pads or textiles, where dispensing by pressing is quicker than pouring.

Practical use

The sprayer screws onto a bottle with an 18/415 neck finish. You will find bottles with this neck finish, as well as ready-made bottle + sprayer combinations, in the Handymade range. If you are making your own combination, we recommend checking the tightness and dispensing with your specific formulation.

Shorten the dip tube so that it reaches just above the bottom of the bottle and can be inserted comfortably when screwing on the sprayer. A tube that is too long will bend and draw poorly, and one that is too short will leave part of the contents unused. After filling the bottle, prime the sprayer by pressing it several times until the dip tube and pump fill with liquid. Only then does it dispense evenly.

One press releases approximately 0.14 ml. You can use this dose to estimate consumption and to write the instructions for use.


Good to know

The sprayer is designed for thin liquids. Oils, emulsions and products thickened with gums or gelling agents spray poorly through a fine nozzle: they produce a jet instead of a mist or clog the nozzle. If you want to spray a slightly thicker product, test how it behaves in this sprayer beforehand.

Before the first filling, we recommend rinsing the sprayer and the bottle, disinfecting them with alcohol or isopropyl alcohol, and leaving them to dry completely. Residual water would dilute the contents and could compromise their microbiological stability. When reusing the sprayer, rinse it with clean water and pump alcohol through it to flush the residues of the previous product out of the dip tube and pump. Dried-on residues of fragrances or thickeners are difficult to remove.

For perfumes with a high concentration of fragrance and for alcohol solutions with a higher proportion of essential oils, we recommend letting the filled bottle stand for several weeks and checking that the pump still seals and sprays the same as at the start.


Frequently asked questions

Which bottles does the 18 mm plastic sprayer fit?
The sprayer screws onto bottles with an 18/415 neck finish. The number 18 indicates the neck diameter in millimetres, and 415 the height and type of thread. On a bottle with a different type of thread, the sprayer will not seat tightly or cannot be screwed on at all, so check the neck type in the bottle parameters before ordering.
Can the dip tube of the sprayer be shortened?
Yes, the dip tube is shortened with a sharp knife or scissors to match the height of the bottle. It is supplied in a length of 115 mm, which is enough even for taller bottles. A correctly shortened tube reaches just above the bottom so that it draws as much of the contents as possible and does not bend when screwed on.
Is the plastic sprayer suitable for oils?
No, this sprayer is not suitable for oils and thicker products. The fine nozzle is designed for thin water-based and alcohol-based liquids, which it sprays as a mist. Oil comes out through it as a jet or drops, and the nozzle may become clogged. Pumps or droppers are better suited to oil products.
Why does the sprayer not spray after filling?
After the bottle is filled, the dip tube and pump are full of air, so the sprayer needs to be primed by pressing it several times until the liquid reaches the nozzle. If it still does not spray, check that the dip tube is inserted and not bent against the bottom of the bottle, and that the nozzle is not clogged with residues of thickened contents.
How do I clean the sprayer before reusing it?
Rinse the sprayer with clean water, then pump alcohol or isopropyl alcohol through it several times to clean the dip tube and the inside of the pump as well. Then leave it to dry completely. Residues of perfumes and thickeners are difficult to remove once dried, so it is better to clean the sprayer as soon as it is empty.

Parameters

Product colour
Black
Country of origin
China
Diameter
22,3 mm
Thread type
18/415
Height
40 mm
Product material
PPPlastic
Tube length
115 mm
Dose
0,14 ml

Product documentation

PDSProduct Data Sheet
Plastic fine mist sprayer, 18/415, black top, 115 mm · OVR18PC3PDF ↓
DrawingTechnical drawing
Plastic fine mist sprayer, 18/415, black top, 115 mm · OVR18PC3PDF ↓
Download all (ZIP)

2 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.