Clear Glass Bottle, 5 ml, 255 pieces

The glass bottle – dropper bottle is suitable for a wide range of liquid products, from thin watery solutions to oil serums and concentrated blends. The key is to choose the appropriate type of closure or dispenser – for example a dropper for precise dosing of liquids, or a standard screw cap if you do not require precise drop-by-drop dosing. Before final use, we recommend testing the behaviour of the specific formulation in the packaging, including during longer-term storage.

The packaging can be used repeatedly if basic hygiene principles are observed. Before each new filling, the bottle must be thoroughly cleaned and then disinfected with a suitable alcohol-based preparation, for example IPA 99 % isopropyl alcohol or ethanol 96 % denatured plant-based. Consistent hygiene minimises the risk of microbial contamination and maintains the stability of your formulations. When switching to a completely different type of product (e.g. from a perfume blend to a serum), always choose more thorough cleaning and disinfection.

Before first use and for repeated filling, we recommend first cleaning the bottle mechanically (rinsing it with a suitable cleaning agent and thoroughly rinsing with clean water) and then disinfecting it with alcohol. It is practical to use highly concentrated alcohols such as IPA 99 % isopropyl alcohol or ethanol 96 % denatured plant-based. After disinfection, allow the packaging to dry completely at room temperature, and only then fill it with the product. When using closures with a dropper or another dispenser, it is advisable to treat these parts in the same way.

If you decide not to reuse the packaging, we recommend placing it into separated collection according to the material indicated in the parameter table for the product. After emptying the glass bottle, remove any product residues, ideally rinse it and place it in the container intended for glass recycling. Sort the closure or dispenser separately according to their material (e.g. plastic, metal component), in accordance with local waste separation rules. In this way, you support the circulation of materials and reduce the amount of waste.

For easier selection, we recommend using the advanced filter, which you will find at the top of the page after clicking on the selected packaging category. In the advanced filter, you can sort the packaging according to several parameters – especially neck type, size, colour and material. Thanks to this, you can quickly filter out bottles, dropper bottles, jars or spray dispensers that will best match your formulation and the desired appearance of the final product.