Fine Mist Sprayer, White Spray with Matte Silver Collar, 24/410

This is a mechanical sprayer with a 24/410 neck that dispenses the bottle contents as a fine mist. It is suitable for water-based and light liquid products applied in small amounts evenly over a larger surface – facial tonics, hydrolate mists, hair sprays, refreshing body sprays, or textile and linen sprays. The white plastic with a matte silver collar looks clean and neutral, making it suitable for various brands and product types without visually competing with the label.

The sprayer body is made of polypropylene (PP), the collar of aluminium. A clear cap is included, protecting the button from accidental pressing during transport or in a bag. The sprayer is suitable for use with cosmetic products and meets cosmetic packaging requirements; a declaration of conformity is available with the product.

Intended contents

• Aqueous solutions and hydrolates – facial tonics, floral waters, mists with a low proportion of glycerin or active ingredients. This is where the sprayer produces the finest and most even mist.
• Alcohol sprays – light eau de toilette, deodorant sprays and hand sanitising solutions. Polypropylene tolerates alcohol well; at high concentrations of essential oils or other solvents, we recommend testing the sprayer in advance.
• Hair and body sprays – leave-in conditioners, sea salt sprays, low-viscosity hair texture mists.
• Workshop and household aids – spraying alcohol onto cold-process soap surfaces, moistening mixtures when making bath bombs, applying cleaning solutions to fabrics.

Not suitable for thick and oily contents. Vegetable oils, higher-viscosity serums or emulsions will not atomise – the contents will squirt in a stream or clog the nozzle. A pump or dropper is more suitable for these products.

Use and assembly

The sprayer screws onto a bottle with the same 24/410 neck type. The dip tube fits standard bottles with this thread. For a shorter bottle, trim it with a sharp knife or scissors so it ends just above the bottom, and cut the end at a slight angle – the angled cut prevents the tube from suctioning to the bottom.

Fill the bottle to the nominal volume, not to the brim. The headspace belongs to the dip tube and the mechanism, which extends into the neck when screwed on. If the bottle is overfilled, the contents will overflow when closing and the sprayer may not seal properly.

Bottles with a 24/410 neck as well as ready-made bottle and sprayer combinations are available in the Handymade range. With your own combination, we recommend verifying the seal, dosage and packaging behaviour with your specific formulation, especially if it contains a higher proportion of alcohol or essential oils.

What is good to know

• Small dose per press – the sprayer is designed for fine application, not for quickly emptying the bottle. For products applied in larger amounts, a trigger sprayer with a higher dose is more suitable.
• Residue in the bottle – the mechanism draws contents through the dip tube, so the last few millilitres below the end of the tube will not be sprayed. A correctly shortened dip tube reduces this residue.
• Preservation of contents – water-based products in the sprayer need preservation just as in any other packaging. The sprayer is not an airless system and the contents are in contact with the air inside the dip tube and mechanism.
• Reuse – the sprayer can be rinsed with clean water and left to dry. When changing the contents, spray it several times with water or alcohol to remove any residue of fragrance or colourant from the mechanism. The mechanism cannot be disassembled.

Frequently asked questions