PLASTIC JARS
Frosted Plastic Jar, Pink Cap & Gasket, 200 ml
The frosted polypropylene jar with a pink screw lid and an inner liner is a ready-made packaging set for creams, body butters, scrubs and masks with a volume of 200 ml . full description
Lowest price in the last 30 days: €1.35
Save €2.52 with this set
Total for 1 pcs: €1.35
Quantities add up across all combinations of this bottle.
Product description
The frosted polypropylene jar with a pink screw lid and an inner liner is a ready-made packaging set for creams, body butters, scrubs and masks with a volume of 200 ml. All three parts fit together, so you simply fill the jar, place the liner inside and screw on the lid. The matte plastic shows the contents only as an outline, and the pink lid sets the packaging apart from other products on the shelf or in a series.
The set is declared suitable for contact with cosmetic products. You will find the declaration of conformity with the product.
What the set is suitable for
The wide neck and the 200 ml volume suit products that are scooped out with the fingers or a spatula and used in larger quantities:
- Body creams and lotions with a thicker consistency – the wide opening makes scooping easy even after most of the contents have been used.
- Body butters and whipped butters – anhydrous products for which a pump makes no sense.
- Sugar and salt scrubs – a grainy mass needs a neck through which it can be scooped comfortably.
- Face and hair masks, hand and foot balms – products that are applied in a thicker layer.
For face creams, which are used in smaller amounts, 200 ml is often too much. A smaller jar of the same type is a better fit there.
How the lid and the liner work together
The pink lid screws onto the jar and protects the contents from spilling and drying out. Underneath it sits the inner liner, a flat clear polypropylene disc that separates the contents from the lid. During transport the cream or butter does not stick to the inside of the lid, and the closure stays clean when opened. The liner also limits contact between the surface of the product and the air under the lid.
When filling, the liner is laid flat directly on the contents and the lid then presses it down. During normal use the customer removes it and puts it back. It is therefore worth pointing out on the label or at the point of sale that it belongs to the packaging.
With whipped butters and scrubs, leave a small gap between the surface of the mass and the rim of the jar. The liner will then sit properly without pushing the contents over the edge.
Volume and filling
The nominal volume of 200 ml is the volume the jar is designed for under normal filling. The brimful volume given in the parameters is the physical volume up to the neck. The difference between them is the allowance for the liner and the lid. The jar should therefore be filled to the nominal volume, not to the brim.
Let the finished emulsion or melted butter cool down before filling. Warm product under a screwed-on lid causes condensation, and water droplets form on the liner or the walls.
Good to know
Before the first filling, wash the jar, the liner and the lid, disinfect them with isopropyl alcohol or ethanol and let them dry completely. This also applies to repeated use. Polypropylene withstands washing in warm water and disinfection with alcohol, but the packaging must be dry before it is filled again.
For formulations with a high proportion of essential oils or alcohol, we recommend testing how the plastic behaves with your specific formulation on one jar and observing it for a longer period before you decide on the whole series.
Polypropylene is light and unbreakable, which you will appreciate when shipping and for bathroom products. All three parts are made of the same material, so after use they are sorted together as plastic.
Lids with the same neck type and other ready-made combinations of a jar with a closure are available in the Handymade range. If you make your own combination, we recommend checking the tightness and the behaviour of the packaging with your specific formulation.
Frequently asked questions
Parameters
Frosted Plastic Jar, 200 ml
Pink Lid for Frosted Plastic Jar, 200 ml
Plastic Gasket for Frosted Plastic Jar, 200 ml
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.





