+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

GLASS JARS

Clear Glass Jar, Silver Aluminium Lid & Gasket, 15 ml

The set of a glass jar with a nominal volume of 15 ml , an aluminium lid and an inner liner is designed for small quantities of cosmetics: lip balms, eye creams, solid perfumes, ointments, or samples of creams and… full description

AvailabilityIn stock · 67 pcs
Product codeO42SP015-OVV42HS
€1.35incl. VAT

Lowest price in the last 30 days: €1.35

Volume pricing
1–199 pcs€1.35Your price
200–999 pcs€1.24−8 %
1000–4999 pcs€1.15−15 %
from 5000 pcs€1.01−25 %

Total for 1 pcs: €1.35

Quantities add up across all combinations of this bottle.

Product description

The set of a glass jar with a nominal volume of 15 ml, an aluminium lid and an inner liner is designed for small quantities of cosmetics: lip balms, eye creams, solid perfumes, ointments, or samples of creams and masks. The clear glass shows both the colour and the texture of the filling. It is therefore useful for products whose appearance you want to keep visible, and for samples where the customer should see what they are getting.

The lid screws onto the thread of the jar and seals with an EPE foam liner on its inner side. The whole set is declared suitable for contact with cosmetic products.


What the set consists of

  • Clear glass jar – a low, wide container with a thread, from which the product is easy to scoop with a finger or a spatula.
  • Aluminium lid – silver in colour, with a pressed-in polyethylene foam liner that sits on the neck and seals the contents.
  • PP inner liner – a white plastic disc that is placed directly on the surface of the filling under the lid. It protects the surface of the cream or balm during transport and limits its contact with the lid.

What it is suitable for

The volume of 15 ml suits products that are used in small amounts. These include lip and cuticle balms, eye and face creams with a higher proportion of active ingredients, solid perfumes, ointment bases, smaller packs of solid deodorants, and concentrated face masks. It also works for trial samples that you include with orders, or for test batches when fine-tuning a formulation.

With water-based and emulsion products, bear in mind that the wide neck makes scooping easier, but at the same time exposes the filling to air and to contact with fingers. Such products require adequate preservation, and we recommend scooping them with a spatula.


Volume and filling

The nominal volume is the amount the jar is designed for under normal filling. The total brimful volume is the physical volume up to the neck, and you will find it in the product parameters. The difference between them is a reserve for the inner liner, the lid, and the expansion of the contents when the temperature changes.

Pour balms and solid products into a jar that is at room temperature, and fit the liner and lid only after the filling has solidified and cooled. This prevents moisture from condensing under the lid and the surface from setting unevenly.


Good to know

Before the first filling, wash and disinfect the jar, the lid and the liner, and let them dry completely. After thorough cleaning, both the glass and the aluminium can be reused. Before further use, check that the foam seal in the lid and the plastic liner are not deformed or soaked with oil.

Clear glass does not block light. Store products containing sensitive oils, vitamins or essential oils in the dark or in a box, or choose a dark packaging variant for these formulations.

Always fill the jar up to the nominal volume, not to the brim. If it is overfilled, the inner liner has nowhere to sit, the filling reaches the thread, and the lid seal stops closing reliably.

For recycling, the glass is sorted as glass, the aluminium lid belongs with metals, and the polypropylene liner with plastics. You will find closures with the same neck finish and other ready-made combinations in the Handymade range. If you build your own combination, we recommend checking the tightness and behaviour of the packaging with your specific formulation.


Frequently asked questions

What is the inner liner in the 15 ml glass jar for?
The inner liner is a flat plastic disc that is placed directly on the surface of the filling under the lid after filling. It protects the surface of the cream or balm from smudging during transport and limits contact between the filling and the lid. Before using the product, you simply remove it, and it can be washed and reused when refilling.
Does a clear glass jar protect the contents from light?
No, clear glass does not block light, and the filling remains exposed to daylight. Store products with sensitive vegetable oils, vitamins or essential oils in the dark or in a box. Where protection from light matters more, choose a dark packaging variant.
Is the 15 ml glass jar suitable for creams with a water phase?
Yes, the set is declared suitable for contact with cosmetics, including creams with a water phase, but the wide neck exposes the filling to air and to contact with fingers. A cream with a water phase in the jar therefore needs adequate preservation, and we recommend scooping it with a clean spatula. The inner liner helps keep the surface of the filling clean during transport and storage.
How much can you actually fit into the 15 ml glass jar?
The jar is filled up to the nominal volume of 15 ml, although its total brimful volume is larger. The difference is a reserve for the inner liner, the lid seal, and the expansion of the filling when the temperature changes. If you fill it to the brim, the filling reaches the thread, the liner does not fit in, and the lid stops sealing.
How do I prepare a glass jar with an aluminium lid before the first filling?
Wash and disinfect the jar, the lid and the liner, and let them air dry. After cleaning, the glass and the aluminium can be reused. Before each further filling, check that the lid seal and the plastic liner are not deformed or soaked with oil, otherwise the lid may not seat properly.

Parameters

Clear Glass Jar, 42 mm, 15 ml

Product colour
Clear
Country of origin
China
Nominal capacity
15
Brimful capacity
24,7 ml
Diameter
46,2 mm
Thread diameter
40,8 mm
Height
29,7 mm
Product material
Glass

Silver Aluminium Lid for Glass Jar, 42 mm

Product colour
Silver
Country of origin
China
Diameter
44 mm
Thread diameter
40 mm
Height
12,1 mm
Product material
AluminiumEPE

White Plastic Gasket, 42 mm

Product colour
White
Country of origin
China
Diameter
37,3 mm
Height
3 mm
Product material
PPPlastic

Product documentation

PPWRPackaging Declaration (PPWR)
Silver Aluminium Lid for Glass Jar, 42 mm · OVV42HSPDF ↓
PDSProduct Data Sheet
Clear Glass Jar, 42 mm, 15 ml · O42SP015PDF ↓
Silver Aluminium Lid for Glass Jar, 42 mm · OVV42HSPDF ↓
White Plastic Gasket, 42 mm · OVV42_STREDPDF ↓
DrawingTechnical drawing
Clear Glass Jar, 42 mm, 15 ml · O42SP015PDF ↓
Silver Aluminium Lid for Glass Jar, 42 mm · OVV42HSPDF ↓
White Plastic Gasket, 42 mm · OVV42_STREDPDF ↓
Download all (ZIP)

7 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.