Closures DIN18
Inner Plastic Dropper to Bottles, 18 mm, long, 860 pieces
Plastic inner dropper for glass pharmaceutical bottles, 18 mm, long The plastic inner dropper is inserted into the neck of a glass pharmaceutical bottle and turns it into packaging that dispenses the contents drop by… full description
Lowest price in the last 30 days: €52.49
Product description
Plastic inner dropper for glass pharmaceutical bottles, 18 mm, long
The plastic inner dropper is inserted into the neck of a glass pharmaceutical bottle and turns it into packaging that dispenses the contents drop by drop. It is suitable for essential oils and their blends, perfume compositions, concentrated serums and tinctures, in other words wherever an exact amount matters and the contents should neither be poured out nor needlessly evaporate. The pack contains 860 pcs of the long version for pharmaceutical bottles with an 18 mm neck.
The inner dropper is made of polypropylene (PP) in a clear version, so it is almost invisible in the neck of the bottle and does not change the look of the packaging. The packaging material is suitable for use with cosmetic products.
How the inner dropper works
The insert is pressed into the neck of the filled bottle and only then is the cap fitted. The narrow opening in the centre of the inner dropper slows the flow of the contents, so when the bottle is tilted, the liquid comes out in individual drops. Dispensing into formulations and use by the customer are therefore more precise than with an open neck.
It also serves as protection against spilling. If the bottle tips over with the cap removed, the contents do not escape all at once. With volatile substances, it also limits the surface area through which the contents evaporate between uses.
Always buy the inner dropper according to the neck diameter of the bottle. This version is intended for an 18 mm neck; it will not fit tightly into a different neck and will either fall out or be impossible to press in.
What it is suitable for
- Essential oils and their blends – the most common use, where you cannot do without drop-by-drop dispensing.
- Perfume compositions and fragrance oils – precise measuring during production and when filling smaller test samples.
- Concentrated oil serums and active blends – if they are thin to medium-fluid, you take out only the amount you need.
- Tinctures and alcohol extracts – with a small bottle volume, dispensing by drops is more suitable than pouring.
Use and filling
Pharmaceutical bottles state their nominal volume and the total brimful volume. Fill up to the nominal volume without the inner dropper, so that the level is easy to see and there is room left in the neck for the insert. Then press the inner dropper evenly into the neck until it is seated around the entire circumference, and screw on the cap. The long version reaches deeper into the neck than the short one, so when choosing, make sure there is some space left below the inner dropper and that the contents are not pushed out when it is pressed in.
Before filling, check that both the inner droppers and the bottles are clean and completely dry. Residual moisture in oil and alcohol products is undesirable. Store them in a dry and clean environment until use.
Thicker oils, viscous serums and products containing a thickener flow slowly or not at all through the inner dropper. Before filling a larger batch, test the behaviour of your specific formulation on a single bottle.
Good to know
Polypropylene is a common material for cosmetic packaging. With concentrated essential oils, strong solvents and long-term storage, we recommend verifying compatibility with a storage test, as with any plastic part of the packaging.
The inner dropper can be removed from the neck, washed and reinserted once dry, but after removal it may sit more loosely in the neck. For products intended for sale, we therefore recommend using a new one for every filling. Caps with the same neck type, as well as ready-made combinations of pharmaceutical bottle + inner dropper + cap, can be found in the Handymade range. If you are making your own combination, check that the cap with inner dropper seals properly and that the bottle can be closed comfortably.
After use, the inner dropper belongs in plastic waste; before recycling, it is separated from the glass pharmaceutical bottle.
Frequently asked questions
Parameters
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.

