LIP BALM CONTAINERS
Lip Balm Tube, plastic, black
Push-up container for a lip balm stick with a nominal volume of 5 ml . The product is pushed up by twisting the bottom part; the cap slides on and keeps the balm covered between uses. full description
Lowest price in the last 30 days: €0.90
Total for 1 pcs: €0.90
Product description
Push-up container for a lip balm stick with a nominal volume of 5 ml. The product is pushed up by twisting the bottom part; the cap slides on and keeps the balm covered between uses. The black polypropylene (PP) is opaque, so the contents are not exposed to light. The lightweight plastic container can withstand carrying in a pocket or handbag.
Used for lip balms, solid perfumes, and treatment sticks with waxes and butters that are filled while hot and applied directly from the container after solidifying. The container is suitable for contact with cosmetic products.
What it is suitable for
- Lip balms – wax and butter formulations are filled in a melted state and form a solid stick after solidifying, which is pushed up as needed.
- Solid perfumes – a fragrance composition worked into a wax base is applied to the wrist or neck; the container protects it from light and evaporation.
- Treatment sticks – cuticle balm, for dry areas on elbows or heels; a small volume lasts for extended use.
- Samples and gift sets – the 5 ml volume is suitable for trial versions of formulations and for balms in sets with multiple fragrances.
Filling and volume
Nominal volume is the volume of filling the container is designed for during standard filling. The total volume to the upper rim is higher; the difference forms the allowance for the cap and the push-up mechanism. Fill to the nominal volume, not to the rim.
Before filling, twist the bottom part so that the base platform is completely down. Pour the melted mass into the container and allow it to solidify at room temperature. Put the cap on only after complete solidification; otherwise the surface of the stick may become indented or deformed.
Pour the mass at the lowest temperature at which it is still fluid enough. Slower cooling at room temperature produces a smoother stick surface; cooling in the refrigerator may cause the centre to sink or develop cracks.
What is good to know
Before the first filling, wash the container and cap, disinfect with isopropyl alcohol or ethanol and allow to dry completely. Moisture trapped under the filling shortens the shelf life of the balm. Anhydrous formulations are not typically preserved, so trapped water in them can promote the growth of microorganisms.
The mechanism works in both directions. After the filling has been wound all the way up, the platform can be returned down, the container cleaned, and refilled. Polypropylene is commonly used for anhydrous wax and oil fillings. For formulations with a higher proportion of essential oils or solvents, we recommend verifying the behaviour of the container with the specific formulation.
The platform must be completely down before filling. If it remains partially extended, less mass will fit and after solidification there will not be enough allowance for the cap.
The container is made of a single type of plastic, polypropylene, and when empty belongs in plastic waste.
Frequently asked questions
Parameters
Product documentation
Learn how to work with it
From our blogVariant: Obal na balzám na pery, plast, čierny

