+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

PLASTIC JARS

Plastic jar 70/400, brown, 200 ml

This amber plastic jar with a volume of 200 ml is intended for packaging creams, body butters, scrubs and other thick or loose products that are scooped out by hand or with a spatula. full description

AvailabilityIn stock · 8741 pcs
Product codeO70PH200
€0.55incl. VAT

Lowest price in the last 30 days: €0.55

Volume pricing
1–199 pcs€0.55Your price
200–999 pcs€0.50−8 %
1000–4999 pcs€0.47−15 %
from 5000 pcs€0.41−25 %

Total for 1 pcs: €0.55

Product description

This amber plastic jar with a volume of 200 ml is intended for packaging creams, body butters, scrubs and other thick or loose products that are scooped out by hand or with a spatula. It is made of PET, so it is light and does not break when dropped, which you will appreciate both when shipping parcels and in everyday use in the bathroom. The amber colour reduces the amount of light reaching the contents, so it suits formulations with vegetable oils, butters or vitamins, which lose stability faster in light. The wide neck with a 70/400 neck finish makes it easier to fill thick products and to clean the jar. It is made in the European Union.

The packaging is suitable for cosmetic products and approved for direct food contact, so it can also be used in the kitchen.


What it is suitable for

  • Creams and body butters – thicker emulsions and anhydrous butters that are scooped out with fingers or a spatula; the wide neck also lets you remove the last remnants.
  • Sugar and salt scrubs – coarser grains can be poured in and scooped out comfortably.
  • Masks and balms – clay and hair masks, solid body balms.
  • Loose products – bath salts, body powders and effervescent bath powders that need closable packaging protected from light.
  • Food and homemade blends – honey, spices, herbal salts or dried tea blends, as the packaging has a certificate for direct food contact.

Filling and volume

The nominal volume of 200 ml is the volume the jar is designed for in normal filling. The brimful capacity given in the parameters is the physical volume up to the neck. The difference between the two forms a reserve for the lid and room for the contents to expand with temperature changes. Fill up to the nominal volume, not to the brim, otherwise the contents will be pushed onto the thread when closing and the lid will not seal.

Creams and butters that still thicken or solidify after pouring should be filled slightly below the nominal volume and left to cool completely in the open jar. If the jar is closed too early, moisture condenses under the lid and water droplets may appear on the surface of the product.

Lids with the same type of neck, as well as ready-made jar and lid combinations, can be found in the Handymade range. If you combine them yourself, we recommend checking the seal and the behaviour of the packaging with your specific formulation before you fill the whole batch.


Good to know

Before the first and every further filling, wash the jar, disinfect it and leave it to dry completely with the neck facing down. Wire scourers and abrasive products scratch the wall, so avoid them when cleaning.

PET is not intended for hot filling. Leave emulsions, butters and balms to cool before pouring; a hot product may deform the wall and impair the seal of the thread.

Do not expose the packaging to aggressive chemicals. Concentrated essential oils and solvents may affect the plastic surface during prolonged contact, so for anhydrous formulations with a high proportion of essential oils we recommend testing the behaviour of the packaging on one piece over several weeks. The dark colour also limits the view of the contents. You cannot judge the colour of the product from the outside, which is worth considering for products where colour is part of the presentation.

After use, put the jar in your plastic recycling; the material is PET.


Frequently asked questions

Does the amber plastic jar protect the contents from light?
Yes, the amber colour of the PET reduces the amount of light that reaches the contents and slows down the changes that light causes in vegetable oils, butters or vitamins. The protection is not complete, so we recommend storing light-sensitive products away from direct sunlight and including a suitable antioxidant in the formulation.
Is the 200 ml plastic jar suitable for food?
Yes, the packaging has a certificate for direct food contact under normal and foreseeable conditions of use. It is suitable for honey, spices, dried herbs, herbal salts or homemade tea blends. The amber colour also protects the contents from light, which you will appreciate especially with spices and dried herbs, which lose aroma and colour in light.
How much content fits into a jar with a nominal volume of 200 ml?
When filled normally, the jar holds 200 ml of contents, as it is designed for this volume. The physical volume up to the rim of the neck is higher and is given in the parameters. The difference serves as a reserve for the lid and for the expansion of the contents with temperature changes. Creams and butters that still solidify after pouring are best filled slightly below this volume.
Can hot cream or balm be filled into a PET jar?
No, a hot product may deform the PET wall and impair the seal of the thread. Leave the emulsion, butter or balm to cool before filling and close the jar only after the contents have completely solidified, so that moisture does not condense under the lid. The same applies to food, for example warm honey or freshly cooked blends.
How do I prepare the jar for the first filling, and can it be reused?
Before the first filling, wash it with warm water and washing-up liquid, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely with the neck facing down. The same procedure applies when reusing it. Do not use wire scourers or abrasive cleaning products, which scratch the wall, and check that the lid seals on the thread each time you fill it again.
Which lid suits a jar with a 70/400 neck finish?
The jar needs a lid with the same 70/400 neck finish. In the Handymade range you will find lids as well as ready-made jar and lid combinations. If you combine them yourself, we recommend checking the seal on one piece with your specific formulation, especially for products with a higher proportion of oils or essential oils.

Parameters

Product colour
Brown
Country of origin
European Union
Nominal capacity
200
Brimful capacity
234 ml
Diameter
72 mm
Thread type
70/400
Height
64 mm
Product material
PETPlastic

Product documentation

PPWRPackaging Declaration (PPWR)
Packaging compliance with the EU packaging regulation: category, PFAS, heavy metalsPDF ↓
PDSProduct Data Sheet
Product properties and usagePDF ↓
Download all (ZIP)

2 PDF files in one archive

Sisa P.13 Nov 2026SK

Verified purchase