+421 950 333 113info@handymade.store

Spend over €100 for discounted shipping!

PLASTIC JARS

Clear Plastic Jar, White Lid, 10 ml

Small jar with a lid for samples, solid perfumes, balms and small amounts of creams or masks. full description

AvailabilityIn stock · 247 pcs
Product codeO37PP010-OVV37PB
€0.47incl. VAT

Lowest price in the last 30 days: €0.47

Save €0.51 with this set

Volume pricing
1–199 pcs€0.47Your price
200–999 pcs€0.43−8 %
1000–4999 pcs€0.40−15 %
from 5000 pcs€0.35−25 %

Total for 1 pcs: €0.47

Quantities add up across all combinations of this bottle.

Product description

Small jar with a lid for samples, solid perfumes, balms and small amounts of creams or masks. The clear jar shows the colour and consistency of the contents, and the white screw lid closes it and gives the packaging a clean look. The set is supplied as a ready-made pair. Both the jar and the lid are made of polystyrene (PS), and both parts are declared suitable for contact with cosmetic products.

A volume of 10 ml is enough for one or two doses of a trial cream, for a fragrance tester for customers, or for a portion of balm to carry in a handbag. When making your own cosmetics, jars like these are also used to set aside a sample from each batch, so that you have something to compare stability and appearance against later.


Suitable uses

  • Samples and testers – creams, body butters, face masks and other thicker emulsions that you want customers to try before buying a larger pack.
  • Solid and anhydrous products – lip and cuticle balms, ointments, solid perfumes and beard waxes that are poured directly into the jar.
  • Small batches and archive – setting aside a sample from each production run, or dividing one larger recipe into several portions.
  • Powder and loose raw materials – pigments, pearl pigments or oxides, where you need to see the shade through the wall without opening the jar.

You reach into the jar with a finger or a spatula, so it is best suited to thick and solid textures. Liquid serums, oils and tonics are better suited to a bottle with a dropper or a fine mist sprayer.


Volume and filling

The nominal volume is the volume the jar is intended for under normal filling. The total brimful volume stated in the parameters is the physical volume up to the neck. The difference between them is a reserve for the lid and for the expansion of the contents when the temperature changes. Fill the jar to the nominal volume, not to the brim, otherwise the contents will push the lid off when closing or soil the thread.

Pour balms and solid perfumes only after the melted mixture has cooled slightly, not straight from the hot water bath. Polystyrene does not tolerate high temperatures as well as glass, and a hot mass can deform the wall of the jar.


Preparing and handling the jar

Before the first filling, wash the jar and the lid in warm water with washing-up liquid, rinse them, briefly disinfect them with isopropyl alcohol or ethanol and leave them to dry completely upside down. Residual water in the thread or in the jar would get into an anhydrous balm and shorten its shelf life.

Tighten the lid by hand. When filling emulsions and ointments, it is worth wiping the rim of the jar before screwing on the lid, so that the thread stays clean and the lid sits straight.

After it has been emptied, the jar can be washed and used again. When reusing it, look out for cracks in the wall and for the condition of the thread. Polystyrene is a rigid and brittle plastic and may crack if dropped or if the lid is overtightened.

Polystyrene is sensitive to essential oils, solvents and concentrated fragrance compositions. For balms or solid perfumes with a higher proportion of essential oils, we recommend first filling one jar and checking after a few days whether the wall turns matte, softens or cracks.


Good to know

The clear wall does not protect the contents from light. Products with sensitive oils, vitamins or plant extracts should therefore be stored in the dark or in a box, or you can choose an opaque jar for them.

The set is declared suitable for contact with cosmetics. This set is not approved for food.

The jar and the lid are made of a single material, polystyrene, so at the end of their life they can be sorted together into plastic recycling.


Frequently asked questions

Is the 10 ml plastic jar suitable for balms with essential oils?
Yes, polystyrene jars are commonly used for balms with essential oils at normal usage rates, but with a higher proportion of fragrances we recommend checking compatibility. Polystyrene may turn matte or soften when exposed to concentrated essential oils or solvents. Fill a test jar and check the wall and the thread after a few days.
How much can you actually put in a 10 ml jar?
Fill it to the nominal volume of 10 ml, not to the brim. The total brimful volume is larger and is stated in the parameters. The difference is a reserve for the lid and for the expansion of the contents when the temperature changes. With solid balms, also allow for the fact that the melted mixture sinks slightly after it solidifies.
Can the jar with a lid be reused?
Yes, after washing and disinfecting, the jar and the lid can be filled again. Wash them in warm water with washing-up liquid, briefly disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Before the next use, check that the wall is not cracked and that the lid fits tightly.
Does a clear jar protect the contents from light?
No, clear polystyrene lets light through and does not protect the contents from it. Store products with oils prone to oxidation, vitamins or coloured extracts in the dark, in a box or in a drawer. The advantage of transparency is that you can see the colour and consistency of the contents without opening the jar.
Is the jar and lid set also approved for food?
No, this set is declared only for contact with cosmetic products. Neither the jar nor the lid has a certificate for direct contact with food, so do not use it for spices, honey or homemade syrups. It is declared suitable for cosmetic balms, creams and samples.
Can the jar be filled with a hot mass?
No, not while it is hot – let the melted mixture cool slightly before pouring. Polystyrene has a lower heat resistance than glass, and a mass poured straight from a hot water bath can deform the wall. Pour while the mixture is still liquid but no longer hot.

Parameters

Clear Plastic Jar, 10 ml

Product colour
Clear
Country of origin
China
Nominal capacity
10
Brimful capacity
13 ml
Diameter
38 mm
Height
20 mm
Product material
PSPlastic

White Plastic Lid, 37mm

Product colour
White
Country of origin
China
Diameter
37 mm
Thread diameter
33,5 mm
Height
8,8 mm
Product material
PSPlastic

Product documentation

PDSProduct Data Sheet
Clear Plastic Jar, 10 ml · O37PP010PDF ↓
White Plastic Lid, 37mm · OVV37PBPDF ↓
Download all (ZIP)

2 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.