Rounded Clear Plastic Bottle 24/410, 100 ml, 112 pcs

Plastic bottle, clear, round, 24/410, 100 ml – pack of 112

Round 100 ml PET bottle for filling toners, facial waters, micellar waters, shampoos, shower gels, massage oils or cleaning solutions. The clear wall shows the colour and purity of the contents, which suits products with an attractive appearance, such as coloured toners or clear hydrosol. The plastic is light and does not break when dropped, so this bottle has proved its worth in the bathroom, on the road and when selling at markets, where glass would be a risk.

The bottle is supplied without closure in a carton of 112 pcs. The neck has a 24/410 thread, so any closure with the same neck type from our range will fit, or you can choose a ready-made bottle and closure combination. The larger pack is appreciated by small-scale producers who fill smaller batches and need the same packaging for a whole range of products. Based on the technical documentation, the packaging material is suitable for use with cosmetic products and meets the relevant legislative requirements; you will find the declaration of conformity with the product.

Suitable uses

• Toners and facial waters – thin water-based formulations can be dispensed from a bottle with a sprayer without pouring.
• Shampoos and shower gels – the 100 ml volume corresponds to a travel or sample size.
• Massage and body oils – an unbreakable bottle is more practical than glass for oil, but the contents are not protected from light.
• Cleaning and technical solutions – the bottle is also of technical grade, so it can be used for auxiliary solutions in the workshop, for example an alcohol solution for cleaning moulds.
• Samples and testers – the smaller volume allows you to hand out trial packs without high costs.

Nominal volume and brimful volume

The nominal volume of 100 ml is the amount the bottle is designed for in normal filling. The total brimful volume, given in the parameters, is the physical volume up to the neck. The difference between them is a reserve for the closure, for the dip tube of the pump or sprayer, and for expansion of the contents when the temperature changes. You should therefore fill to the nominal volume, not to the brim. If you plan to use a pump, also allow for the volume taken up by its tube.

Choosing a closure

If you are combining a bottle and closure yourself, we recommend checking the tightness, dispensing and behaviour of the packaging with your specific formulation. Not every sprayer can handle thicker gels.

Good to know

Clear PET does not protect the contents from light. Formulations with essential oils, vegetable oils prone to yellowing or unstable active ingredients are better suited to amber or blue glass, or should be stored out of direct light. For ordinary toners, shampoos and shower gels that are used up within weeks, this is usually not a problem.

PET should not be filled with hot contents. Let emulsions and gels cool to room temperature before filling, otherwise the wall of the bottle may deform and the packaging may be “pulled in” after cooling. It is also unsuitable for concentrated essential oils, acetone and other aggressive solvents that attack the plastic. For formulations with a higher proportion of essential oils or alcohol, leave the filled bottle to stand for several weeks and check that the wall does not turn cloudy or soften and that the scent of the contents does not change.

After washing and disinfection, the bottle can be reused, provided it has no scratches or cloudiness in which residues of the previous contents are difficult to remove. At the end of its life, simply rinse it and hand it in for plastic recycling.

Frequently asked questions