PLASTIC BOTTLES
Amber Plastic Bottle, 24/410, 150 ml, 290 pcs
This amber plastic bottle with a volume of 150 ml and a 24/410 neck finish is designed for filling liquid and semi-liquid cosmetic preparations whose contents need protection from light. full description
Lowest price in the last 30 days: €159.20
Save €46.70 with this set
Product description
This amber plastic bottle with a volume of 150 ml and a 24/410 neck finish is designed for filling liquid and semi-liquid cosmetic preparations whose contents need protection from light. It is made of PET, so it is lightweight and does not break when dropped. That makes it also suitable for products that the customer carries in a bag or uses in the shower. The pack contains 290 pcs, which suits smaller workshops as well as producers who fill larger production runs.
The amber colour reduces the penetration of light and so slows down colour fading and the oxidation of more sensitive ingredients. The bottle is used mainly for toners, hydrosols, facial lotions, micellar waters, light body milks, spray hair conditioners, or shampoos and shower gels in a smaller size.
What it is suitable for
- Water-based and water-alcohol preparations – toners, hydrosols, refreshing face and body sprays, hair waters. With a 24/410 fine mist sprayer, it becomes a ready-to-use spray.
- Rinse-off products – shampoos, shower gels and liquid soaps in a travel or trial size. There is no risk of breakage in the shower.
- Light emulsions – body and facial milks dispensed with a pump.
- Light-sensitive products – preparations with extracts, vitamins or natural dyes, where light speeds up changes in colour or fragrance.
Nominal and total volume
The nominal volume of 150 ml is the amount the bottle is designed for in normal filling. The total brimful volume given in the parameters is the physical volume up to the neck and is higher. The difference is a reserve for the dip tube of the sprayer or pump, for the closure, and for the expansion of the contents when the temperature changes. The bottle should therefore be filled to the nominal volume, not to the brim. If it is overfilled, the contents are pushed out when the closure is fitted, and dispensing closures may not work correctly.
When filling emulsions and thicker gels, leave a slightly larger reserve in the neck, so that the contents are not pushed out when the pump is screwed on and the thread stays clean. A contaminated thread often causes leaks.
Closures and combinations
The 24/410 neck finish is a widespread standard. You will find closures with the same neck type and ready-made bottle + closure combinations in the Handymade range. If you assemble your own set, we recommend checking the seal, dispensing and behaviour of the packaging with your specific formulation. The viscosity and composition of the product affect how well the sprayer or pump works.
Good to know
The packaging material is suitable for use with cosmetic products and meets the relevant legislative requirements. You will find the EU declaration of conformity in the product parameters.
PET is not intended for hot filling. Let emulsions, gels and aqueous solutions cool to room temperature before filling, otherwise the wall of the bottle may become deformed. Do not expose the material to aggressive chemicals. For products with a higher proportion of essential oils, fragrance compositions or solvents, we recommend testing in advance how the bottle behaves with the contents over time, in particular whether the wall loses its gloss and whether the fragrance changes.
Store empty bottles in a dry and clean environment at 5–30 °C, away from direct sunlight and heat sources. Before first filling, rinse the bottle, disinfect it with isopropyl alcohol or ethanol, and let it dry completely with the neck facing down. Once the contents have been used up, the bottle can be reused after thorough washing and disinfection. When switching between different products, bear in mind that the plastic may retain the fragrance of the previous contents.
The amber colour reduces light, but it does not replace the preservative system or the antioxidants in the formulation. Water-based preparations in this bottle need preservation just as in any other packaging.
The bottle bears the material code PET 1 and, once emptied and rinsed, should go in the separate collection for plastics.
Frequently asked questions
Parameters
- Product colour
- Brown
- Country of origin
- European Union
- Nominal capacity
- 150
- Brimful capacity
- 170 ml
- Diameter
- 49 mm
- Thread type
- 24/410
- Height
- 118 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.

