Variant: Pipeta čierna s poistkou, 71 mm
Closures DIN18
Black pipette with lock, 71 mm
The black safety dropper is a dropper with an 18/415 neck finish that closes bottles with an 18 mm neck and dispenses the contents drop by drop at the same time. full description
Lowest price in the last 30 days: €0.55
Total for 1 pcs: €0.55
Product description
The black safety dropper is a dropper with an 18/415 neck finish that closes bottles with an 18 mm neck and dispenses the contents drop by drop at the same time. The glass tube is 71 mm long and is intended for shorter bottles. It is used for serums, facial and body oils, tinctures, perfume compositions in a carrier oil and concentrates of active ingredients, that is, wherever precise dispensing in small amounts is needed.
The black closure and bulb look discreet on both dark and light glass and match amber or black bottles, which are used for light-sensitive contents.
What to use it for
- Facial serums and oils – one or two drops on the palm are a common dose for concentrated products, and the dropper measures it out without pouring.
- Tinctures and alcohol extracts – glass does not absorb the scent or colour of the contents and does not react with alcohol.
- Perfume compositions and fragrance blends – when diluting fragrance oils in a carrier, the number of drops can be recorded in the recipe and repeated later.
- Samples and test batches – for small bottles from which only a little of the contents is taken at a time.
How to choose a dropper
The deciding factor is the neck type of the bottle. This dropper fits the 18/415 neck finish, which is listed in the parameters of the bottles in the Handymade range. The second detail is the length of the glass tube. A tube of the right length ends a few millimetres above the bottom, draws up even the last remainder of the contents and does not hit the bottom when you tighten the closure.
Before ordering a larger quantity, compare the 71 mm length with the inner height of the bottle from the neck to the bottom. The tube should be a few millimetres shorter, never longer.
Ready-made bottle + dropper combinations have their own description in the range. If you make your own combination, we recommend checking the tightness of the closure and the behaviour of the dropper with your specific formulation.
Good to know
Before first use, wash the dropper, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Residual water in the glass tube would get into an oil-based or anhydrous product.
Fill the bottle to its nominal volume, not to the brim. Once inserted, the dropper takes up part of the inner space, and if the bottle is overfilled, the contents would overflow when you close it.
The bulb is made of silicone and the closure of polypropylene. For concentrated essential oils, pure perfume compositions or products with a high proportion of solvents, we recommend checking beforehand whether the bulb changes shape or elasticity after prolonged contact. With normal use, the contents are not drawn into the bulb, as the dropper is squeezed only so that the liquid stays in the glass tube.
The packaging material is suitable for use with cosmetic products and meets the relevant legal requirements; the declaration of conformity is available with the product. At the end of its life, sort the glass tube and the plastic parts separately.
The glass tube is thin and may break off if dropped on a hard surface. Check the tip before each refill, and do not use a cracked dropper.
