+421 950 333 113info@handymade.storeHandymade Days: −10 % on all ready-made productsShop now

GLASS BOTTLES 30 ml

Clear Glass Bottle, White Pump, 18/400, 30 ml

This clear glass bottle with a white plastic pump holds 30 ml and is used for filling serums, light creams, facial oils and liquid emulsions that are dispensed in small amounts. full description

AvailabilityIn stock · 71 pcs
Product codeO18SP030B-OVD18PB5
€1.88incl. VAT

Lowest price in the last 30 days: €1.88

Volume pricing
1–199 pcs€1.88Your price
200–999 pcs€1.72−8 %
1000–4999 pcs€1.60−15 %
from 5000 pcs€1.41−25 %

Total for 1 pcs: €1.88

Quantities add up across all combinations of this bottle.

Product description

This clear glass bottle with a white plastic pump holds 30 ml and is used for filling serums, light creams, facial oils and liquid emulsions that are dispensed in small amounts. The pump delivers roughly the same dose every time, the contents do not spill, and you do not need to touch the product with your fingers when applying it. Clear glass shows the colour and consistency of the contents, which is useful for gift packs or for products where appearance is part of the result. The set is sold as a whole, and the bottle and the pump share the same 18/400 neck finish, so they fit together.

The bottle is made of glass and the pump of polypropylene (PP). Both parts are declared suitable for contact with cosmetic products, and you will find the declaration of conformity with the product.


What it is suitable for

  • Facial and hair serums – the pump draws thin and medium-thick textures without any problem, and 30 ml corresponds to a common serum pack that lasts several weeks of use.
  • Light emulsions and lotions – fluids and day creams of lower thickness are dispensed cleanly and hygienically.
  • Facial and nail oils, oil serums – the pump measures out a smaller amount than pouring from the bottle, so you do not use too much oil.
  • Samples and travel sizes – for creams and lotions that you usually sell in larger containers, it works as a tester or a travel pack.
  • Hand cream – a thin hand cream or a cuticle oil for your handbag or work desk.

Thick creams, butters and balms do not belong in this packaging. The pump either does not draw them up or they stop in the tube, so a jar is more suitable for such textures.


Nominal and total volume

The nominal volume of 30 ml is the volume the bottle is designed for in normal filling. The brimful volume given in the parameters is the physical volume up to the neck. The difference leaves room for the tube and the pump body, which take up part of the space once screwed on, and for the expansion of the contents when the temperature changes. The bottle should therefore be filled up to the nominal volume. If it is filled up to the neck, the contents overflow when the pump is fitted and soil the thread.


How to work with the set

Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely upside down. It is enough to rinse the pump with clean water or ethanol and press it several times so that the liquid runs out of the tube. Pour the product into the dry bottle up to the nominal volume, screw on the pump and immerse the tube in the contents.

When using it for the first time, press the pump several times until the tube and the pump body fill and the product starts to come out. The dose per press is given in the pump parameters. When formulating, you can use it to work out how many presses correspond to the recommended amount for one application.

Fill finished emulsions into the bottle only after they have cooled down completely and settled. A warm emulsion in a closed bottle creates a vacuum, and the pump then draws in air during the first presses and the product comes out intermittently.

Glass withstands washing in hot water and disinfection with ethanol, and for repeated use the bottle is cleaned in the same way as before the first filling. The pump is difficult to take apart, so for a new product we recommend a new pump, especially when changing the contents from an oil-based to a water-based product or the other way round. Otherwise, residues of the old product in the tube would mix with the new one.


Good to know

Clear glass does not protect the contents from light. Serums with vitamin C, retinoids, unstable plant extracts, or oils prone to oxidation change faster in a clear bottle. Store such products in a box or out of direct light, or choose amber or blue glass from the Handymade range.

The set is declared suitable for contact with cosmetics. It has not been assessed for contact with food, so it is not suitable for homemade oils, syrups or other food products.

For products with a higher proportion of essential oils, alcohol or solvents, we recommend testing one piece before a larger batch and checking the tightness, the colour of the plastic and the smoothness of dispensing after several weeks. The same test is recommended for emulsions of lower viscosity, which could leak from the pump when turned upside down. For transport, keep the bottle with the pump in an upright position.

The pump usually does not empty the last millilitres at the bottom of the bottle, so take this residual amount into account when calculating how far a pack will go.

Instead of the pump, other closures with an 18/400 neck finish from the Handymade range, such as droppers or caps, can also be screwed onto this bottle. For your own combination, we recommend checking the tightness, dispensing and behaviour of the packaging with your specific formulation. Glass belongs in glass recycling, and once the contents are used up, unscrew the pump and dispose of it separately as plastic.


Frequently asked questions

Does a clear glass bottle with a pump protect the contents from light?
No, clear glass lets light through and does not protect the contents from it. It is suitable for products that are not sensitive to light, or for those that the customer stores in a box or in a drawer. Serums with vitamin C, retinol or oils prone to oxidation are better kept in amber or blue glass, or in a box away from daylight.
How much product should be filled into a 30 ml glass bottle with a pump?
You fill 30 ml, that is, up to the nominal volume and not to the brim. The brimful volume is larger and is given in the parameters, and the difference serves as room for the tube and the pump body and for the expansion of the contents when the temperature changes. If the bottle is filled up to the neck, the contents overflow through the thread when the pump is screwed on.
Is a glass bottle with a pump suitable for facial oil?
Yes, facial oils and oil serums are among the typical uses of this set. The pump measures out a small amount of oil that can be spread on the face or nails without using too much. For oils with a higher proportion of essential oils, we recommend testing one piece first and checking the tightness and the condition of the plastic of the pump after several weeks.
Can a glass bottle with a pump be filled with cream?
It can, if the cream has a thin to medium consistency, such as a lotion, fluid or light day cream. The pump does not draw up thick creams, butters and balms, or they stop in the tube. For thicker emulsions, we recommend testing the dispensing on one piece before filling a whole batch, as the consistency still changes after the emulsion cools down.
How do you clean a glass bottle with a pump for repeated use?
Wash the bottle with warm water and washing-up liquid, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely. Rinse the pump with water or ethanol and pump it until clean liquid comes out. When changing the type of contents, for example from oil to a water-based serum, a new pump is recommended, because residues in the tube would otherwise mix with the new product.
Is the 30 ml glass bottle with a pump suitable for food?
No, the set has not been assessed for contact with food and is not suitable for homemade oils, syrups or tinctures for internal use. Both the bottle and the pump are declared suitable for contact with cosmetic products, and the declaration of conformity is available with the product. For food use, choose packaging from the range that is stated to be suitable for food contact.

Parameters

Clear Glass Bottle, 18/400, 30 ml

Product colour
Clear
Country of origin
European Union
Nominal capacity
30
Brimful capacity
35 ml
Diameter
31,5 mm
Thread type
18/400
Height
93 mm
Product material
Glass

White Plastic Pump with Cap, 18/400

Product colour
WhiteClear
Country of origin
European Union
Diameter
23,5 mm
Thread type
18/400
Height
33,7 mm
Product material
PPPlastic
Tube length
83 mm
Dose
0,15 ml

Product documentation

PDSProduct Data Sheet
Clear Glass Bottle, 18/400, 30 ml · O18SP030BPDF ↓
White Plastic Pump with Cap, 18/400 · OVD18PB5PDF ↓
Download all (ZIP)

2 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.