GLASS BOTTLES 30 ml
Clear Glass Bottle, White Pump, 18/400, 30 ml
This clear glass bottle with a white plastic pump holds 30 ml and is used for filling serums, light creams, facial oils and liquid emulsions that are dispensed in small amounts. full description
Lowest price in the last 30 days: €1.88
Total for 1 pcs: €1.88
Quantities add up across all combinations of this bottle.
Product description
This clear glass bottle with a white plastic pump holds 30 ml and is used for filling serums, light creams, facial oils and liquid emulsions that are dispensed in small amounts. The pump delivers roughly the same dose every time, the contents do not spill, and you do not need to touch the product with your fingers when applying it. Clear glass shows the colour and consistency of the contents, which is useful for gift packs or for products where appearance is part of the result. The set is sold as a whole, and the bottle and the pump share the same 18/400 neck finish, so they fit together.
The bottle is made of glass and the pump of polypropylene (PP). Both parts are declared suitable for contact with cosmetic products, and you will find the declaration of conformity with the product.
What it is suitable for
- Facial and hair serums – the pump draws thin and medium-thick textures without any problem, and 30 ml corresponds to a common serum pack that lasts several weeks of use.
- Light emulsions and lotions – fluids and day creams of lower thickness are dispensed cleanly and hygienically.
- Facial and nail oils, oil serums – the pump measures out a smaller amount than pouring from the bottle, so you do not use too much oil.
- Samples and travel sizes – for creams and lotions that you usually sell in larger containers, it works as a tester or a travel pack.
- Hand cream – a thin hand cream or a cuticle oil for your handbag or work desk.
Thick creams, butters and balms do not belong in this packaging. The pump either does not draw them up or they stop in the tube, so a jar is more suitable for such textures.
Nominal and total volume
The nominal volume of 30 ml is the volume the bottle is designed for in normal filling. The brimful volume given in the parameters is the physical volume up to the neck. The difference leaves room for the tube and the pump body, which take up part of the space once screwed on, and for the expansion of the contents when the temperature changes. The bottle should therefore be filled up to the nominal volume. If it is filled up to the neck, the contents overflow when the pump is fitted and soil the thread.
How to work with the set
Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely upside down. It is enough to rinse the pump with clean water or ethanol and press it several times so that the liquid runs out of the tube. Pour the product into the dry bottle up to the nominal volume, screw on the pump and immerse the tube in the contents.
When using it for the first time, press the pump several times until the tube and the pump body fill and the product starts to come out. The dose per press is given in the pump parameters. When formulating, you can use it to work out how many presses correspond to the recommended amount for one application.
Fill finished emulsions into the bottle only after they have cooled down completely and settled. A warm emulsion in a closed bottle creates a vacuum, and the pump then draws in air during the first presses and the product comes out intermittently.
Glass withstands washing in hot water and disinfection with ethanol, and for repeated use the bottle is cleaned in the same way as before the first filling. The pump is difficult to take apart, so for a new product we recommend a new pump, especially when changing the contents from an oil-based to a water-based product or the other way round. Otherwise, residues of the old product in the tube would mix with the new one.
Good to know
Clear glass does not protect the contents from light. Serums with vitamin C, retinoids, unstable plant extracts, or oils prone to oxidation change faster in a clear bottle. Store such products in a box or out of direct light, or choose amber or blue glass from the Handymade range.
The set is declared suitable for contact with cosmetics. It has not been assessed for contact with food, so it is not suitable for homemade oils, syrups or other food products.
For products with a higher proportion of essential oils, alcohol or solvents, we recommend testing one piece before a larger batch and checking the tightness, the colour of the plastic and the smoothness of dispensing after several weeks. The same test is recommended for emulsions of lower viscosity, which could leak from the pump when turned upside down. For transport, keep the bottle with the pump in an upright position.
The pump usually does not empty the last millilitres at the bottom of the bottle, so take this residual amount into account when calculating how far a pack will go.
Instead of the pump, other closures with an 18/400 neck finish from the Handymade range, such as droppers or caps, can also be screwed onto this bottle. For your own combination, we recommend checking the tightness, dispensing and behaviour of the packaging with your specific formulation. Glass belongs in glass recycling, and once the contents are used up, unscrew the pump and dispose of it separately as plastic.
Frequently asked questions
Parameters
Clear Glass Bottle, 18/400, 30 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 30
- Brimful capacity
- 35 ml
- Diameter
- 31,5 mm
- Thread type
- 18/400
- Height
- 93 mm
- Product material
- Glass
White Plastic Pump with Cap, 18/400
- Country of origin
- European Union
- Diameter
- 23,5 mm
- Thread type
- 18/400
- Height
- 33,7 mm
- Tube length
- 83 mm
- Dose
- 0,15 ml
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.




