+421 950 333 113info@handymade.store−10 %Shop now

Closures DIN18

Dropper, black, plastic, 71 mm

The black dropper with an 18/410 neck finish closes bottles for serums, facial oils and tinctures and at the same time dispenses the contents drop by drop. full description

AvailabilityIn stock · 1458 pcs
Product codeOVK18CM071
€0.62incl. VAT

Lowest price in the last 30 days: €0.62

Volume pricing
1–199 pcs€0.62Your price
200–999 pcs€0.57−8 %
1000–4999 pcs€0.53−15 %
from 5000 pcs€0.46−25 %

Total for 1 pcs: €0.62

Product description

The black dropper with an 18/410 neck finish closes bottles for serums, facial oils and tinctures and at the same time dispenses the contents drop by drop. It is suitable where a product is applied in a small amount and more precisely than by pouring: concentrated serums with active ingredients, essential oil blends, oil elixirs for the face or hair, herbal tinctures. The glass tube, 71 mm long, is intended for bottles of a matching height, so that it reaches almost to the bottom and draws out the last drops as well.

The black polypropylene cap matches amber, blue and black glass and covers the neck without showing the contents. The dropper is suitable for contact with cosmetic products; the declaration of conformity is part of the product documentation.


What the dropper consists of

  • PP cap – carries the thread, screws directly onto the neck of the bottle and holds the whole dropper in place.
  • Glass tube – draws in and releases the contents. Glass does not react with oils or alcohol and does not change the scent of the product.
  • Silicone bulb – squeezing it pushes out the air, and when released it draws the liquid into the tube. It is flexible and withstands repeated squeezing.

What it is suitable for

It is most often combined with bottles for serums and facial oils, from which the customer takes a few drops per use. It works well with essential oils and their blends, where the product is dispensed drop by drop into a diffuser, a bath or a formulation, and with tinctures or alcohol extracts. In production it is also useful for measuring out concentrated active ingredients and fragrance compositions for small batches. It draws up liquid and slightly viscous products without any problem, but it will not draw thick gels and balms into the tube.

Before ordering, compare the length of the dropper with the height of the bottle. The tube should end just above the bottom. With a short tube, the contents at the bottom remain out of reach; with a long tube, the tube rests against the bottom and the cap does not seat on the neck.


Good to know

Before first use, take the dropper apart, wash the cap, the tube and the bulb, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Moisture in the tube would get into an anhydrous oil or serum. Follow the same procedure when switching between two different products.

Fill the bottle only up to its nominal volume. Once the tube is inserted, the level rises, and if you fill to the brim, the contents would overflow through the neck or remain in the cap.

The size of a drop depends on the viscosity and surface tension of the liquid. A thicker oil forms larger drops than alcohol or an aqueous solution, so the number of drops per millilitre differs between products. Where an exact amount matters, weigh the raw material instead and use the dropper to dispense the finished product.

With concentrated essential oils and solvents, check how the silicone bulb behaves with your specific formulation. With prolonged contact with some substances, silicone may soften or swell; the glass tube and the PP cap do not have this problem. Also check the tightness of the assembly with your bottle before a larger production run, especially if the product is sent by post.

The glass tube may break if dropped. Do not overtighten the dropper, so that the tube does not press against the bottom.

You will find bottles with the same type of neck and ready-made combinations of a bottle with a dropper in the Handymade range. At the end of its life, the dropper is taken apart into three parts; the polypropylene cap, the glass and the silicone are sorted separately.

If you make a serum with a water phase, cleaning and drying the dropper before filling is not enough. A water-based product needs a preservative regardless of the packaging, because the bulb draws air into the bottle with every use.


Frequently asked questions

Which bottles is the black 18/410 dropper, 71 mm long, suitable for?
The dropper is suitable for bottles with an 18/410 neck finish whose height matches the length of the tube. You will find the neck type in the parameters of each bottle. Compare the length with the inner height of the bottle from the neck to the bottom; the tube should end just above the bottom. If you do not want to measure, choose a ready-made combination of a bottle with a dropper.
Can the black dropper be used for essential oils?
Yes, the glass tube withstands essential oils without any change of scent or colour. The silicone bulb requires caution, as it comes into contact with concentrated essential oils every time it is squeezed. With pure oils and blends, we recommend checking the behaviour of the bulb on one bottle if you will store the product for a longer time.
How do I clean the dropper and reuse it?
Take the dropper apart into the cap, the tube and the bulb, wash them in warm water with detergent, rinse them and disinfect them with isopropyl alcohol or ethanol. All parts must be completely dry before the next filling. Reuse is common; with each cycle, check that the bulb is still springy and that the tube has no crack.
Why should I not fill a bottle with a dropper to the brim?
A bottle with a dropper is filled to its nominal volume, not to the neck. Once the glass tube is inserted, the level rises by the volume of the tube and the air in the bulb. If you fill to the brim, the contents overflow through the neck, soil the thread and impair the seal of the cap.
Is the dropper suitable for thick products?
No, the dropper is intended for liquid and slightly viscous products. Thick gels, balms and creams will not be drawn into the glass tube, or they will be released unevenly. For serums with a higher proportion of thickener, we recommend testing the dispensing before choosing the packaging, or lowering the viscosity of the formulation.

Parameters

Product colour
Black
Country of origin
China
Thread type
18/410
Dropper length
76 mm
Product material
GlassPPSiliconePlastic

Product documentation

PPWRPackaging Declaration (PPWR)
Packaging compliance with the EU packaging regulation: category, PFAS, heavy metalsPDF ↓
PDSProduct Data Sheet
Product properties and usagePDF ↓
DrawingTechnical drawing
Packaging drawing with dimensionsPDF ↓
Download all (ZIP)

3 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.