Yes, the glass bottle of the roll-on type can, with proper care, be safely used repeatedly. Before each new filling, however, it is necessary to clean and disinfect the packaging thoroughly. We recommend first rinsing the bottle mechanically with a suitable cleaning agent, rinsing well with water and then disinfecting with a suitable alcohol, for example IPA 99% isopropyl alcohol or ethanol 96% denatured, plant-based. By observing hygiene principles, you minimise the risk of microbial contamination and maintain the stability of your cosmetic products.

We recommend carefully removing the roll-on mechanism (the ball and its housing) from the neck of the bottle and disassembling it to the extent allowed by the construction. First loosen any product residues by soaking in warm water with a mild cleaning agent and then cleaning mechanically with a soft brush or cloth. After thoroughly rinsing with clean water, allow the individual parts to dry completely in a clean and dust-free place. Before reassembly and filling, we recommend disinfecting the components with a suitable alcohol and allowing them to air out so that any residual alcohol odour is removed.

The glass roll-on pharma bottle is ideal for products that are applied locally and in a small amount. It is excellent for concentrated facial and eye serums, blends of essential and vegetable oils for pulse points, natural perfume oils, as well as soothing or refreshing roll-on compositions for travelling. Thanks to precise dosing, it is also suitable for products with a higher proportion of more expensive active substances, where controlled consumption is important.

We recommend storing filled glass roll-on bottles in a dry and cooler place, away from direct sunlight and sources of heat. Avoid large temperature fluctuations and long-term exposure to a humid environment. For products containing essential oils or sensitive active substances, it is advisable to store the packaging as far as possible at a stable temperature and to close the bottle carefully after each use in order to minimise contact with air and moisture.

If you decide not to use the packaging any further, we recommend first removing any product residues. The glass part of the bottle can, after cleaning, be placed in the container intended for glass in most waste-sorting systems, while the closures, the roll-on ball and the plastic parts are sorted according to the material specified in the product parameters. Before recycling, it is advisable to separate the components at least roughly (glass separately, plastic separately), which helps support more efficient waste processing. Current recommendations for waste sorting may differ depending on the municipality or collection company, so it is advisable to check the local sorting rules.

To select suitable packaging, you can use the advanced filter, which is located in the upper part of the page after clicking on a specific packaging category. Thanks to the filter, you can easily narrow down the offer according to the parameters that are key for you – for example according to the type and size of the neck, the overall size of the packaging, the colour or the material used. In this way, you will quickly find bottles, pharma bottles, jars or other containers that meet both the technical requirements and the design of your product.