Closures DIN18
Glass Dropper, Glossy Silver, 50 mm
Silver glossy dropper, 50 mm Dropper closure with 18/410 thread closes the bottle and dispenses the contents drop by drop, without finger contact with the product. full description
Lowest price in the last 30 days: €0.63
Total for 1 pcs: €0.63
Product description
Silver glossy dropper, 50 mm
Dropper closure with 18/410 thread closes the bottle and dispenses the contents drop by drop, without finger contact with the product. Suitable for preparations used in small amounts where precise dosing matters: facial serums, oils, tinctures and essential oil blends.
The glossy silver surface gives the bottle a clean, uniform appearance and pairs well with clear, amber and frosted glass. A glass tube is recommended primarily for glass bottles – the glass + glass combination is common for serums and oils, as it does not react with the contents.
What the dropper consists of
- Glass tube – the only part in permanent contact with the contents. Glass does not react with oils, essential oils or alcohol extracts and does not discolour.
- Silicone bulb – squeezing draws in the contents, releasing dispenses it drop by drop. Silicone is flexible and retains its shape even with repeated use.
- PP ring with aluminium sleeve – the plastic inner part carries the thread and seats on the bottle neck; the aluminium sleeve gives the closure its silver gloss. The aluminium is not in contact with the contents.
Use and dosing
The dropper is screwed onto a bottle with an 18/410 neck. The bulb is squeezed, the tube is submerged in the contents, the bulb is released and the drawn-in product is dispensed drop by drop onto the skin or fingers. Drop size depends on the viscosity of the product, so the number of drops per dose should be verified with the specific formulation.
Dropper length should match the height of the bottle. A correctly chosen tube reaches almost to the bottom but does not touch it – this allows drawing contents even from a nearly empty bottle and prevents the tube from being damaged when closing. The length is listed in the parameters; when choosing a bottle, simply compare it with the height of its inner space.
A bottle with a dropper should be filled only to the nominal volume, not to the brim. The nominal volume is the volume the container is designed for under normal filling conditions; the total volume up to the neck is larger. The difference is a reserve for the tube, which pushes some contents upward when screwed in, and for expansion of the contents with temperature changes. An overfilled bottle will overflow when closed.
Suitable preparations
- Facial serums – both water-based and oil-based, dosed a few drops at a time.
- Facial and hair oils – including oils with a higher proportion of essential oils.
- Oil and alcohol tinctures and extracts – glass and silicone are resistant to ethanol at common concentrations.
- Concentrates of active ingredients – added to finished preparations drop by drop.
For watery tonics or preparations applied over a larger area, a dropper is impractical – a spray or pump with the same thread type is more suitable.
Good to know
The packaging is suitable for use with cosmetic products; the declaration of conformity is provided with the product. It is not declared for food contact.
Before first filling, the dropper is washed and disinfected with isopropyl alcohol or ethanol and left to dry completely – the glass tube is rinsed through and the disinfecting solution is drawn into and expelled from the bulb several times. The same procedure applies for reuse; residues of old oil in the tube would oxidise in the new contents and impair its scent.
The silicone bulb tolerates common cosmetic oils and alcohol extracts. With undiluted essential oils, especially citrus ones, and preparations with a higher proportion of solvents, it is advisable to monitor whether the bulb softens or swells over time. The contents should remain in the tube, not sit in the bulb for extended periods – drawn-in product should therefore not be left in the dropper and should be expelled back after dosing.
The glossy aluminium sleeve is decorative. When filling, any oil that has run onto the bottle neck should be wiped off before screwing on the dropper, so it does not get under the sleeve and damage its appearance.
The seal of the closure depends on the neck shape of the specific bottle. Ready-made bottle + dropper combinations with verified fit are available from Handymade; with a custom combination, it is recommended to verify the seal, dosing and packaging behaviour with the specific formulation, ideally also when on its side and during transport.
After use, the glass tube, silicone bulb and plastic ring with aluminium sleeve can be separated and sorted by material.
Frequently asked questions
Parameters
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
