Glass Dropper, Glossy Silver, 84 mm

The shiny silver dropper 84 mm is a closure with a glass tube for bottles with an 18/410 neck, enabling precise drop-by-drop dispensing. It is best suited for facial serums, oil blends, tinctures and active ingredient concentrates, where a small amount needs to be taken without pouring and without unnecessary contact of the contents with air and fingers.

What the dropper consists of

• Glass tube – reaches into the contents of the bottle. Glass is chemically stable, does not absorb fragrance or colour and is suitable for oil, alcohol and water-based contents.
• Silicone bulb – a flexible white tip used to draw up and dispense the contents when pressed. Silicone retains its elasticity even with repeated use.
• Threaded collar – aluminium shell with a shiny silver finish and a plastic thread inside. It screws onto the bottle neck and ensures a seal. The understated silver appearance can be combined with clear, amber and blue glass.

What it is suitable for

The dropper makes sense wherever the product is dispensed drop by drop and in small quantities:

• Facial and oil serums – dispensing a few drops directly onto the palm or skin.
• Essential oil blends and fragrance compositions – precise dosing into a diffuser, massage oil or soap mass.
• Tinctures and herbal extracts – alcohol-based contents, where the glass of the tube does not react with the solvent.
• Active ingredient concentrates – samples and small packages where the substance is added to a finished base drop by drop.

The dropper is not suitable for thick creams, high-viscosity gels or contents with solid particles that would get stuck in the narrow tube.

Good to know

Tube length must correspond to the height of the bottle. A correctly chosen dropper reaches just above the bottom so that the remaining contents can also be drawn out, but must not rest against the bottom. Otherwise the collar will not tighten and the closure will not seal. The dropper length and bottle dimensions are listed in the specifications; when selecting, simply compare these figures.

Before first use, we recommend washing and disinfecting the dropper (for example with isopropyl alcohol or ethanol) and allowing it to dry completely. Moisture in the tube can cause cloudiness in oil-based contents and put strain on the preservation of water-based contents.

For repeated use, the dropper can be disassembled into the bulb, glass tube and collar. Glass and silicone withstand normal cleaning without damage, but do not clean the shiny metal collar with abrasive products to avoid scratching it.

Contents with a high proportion of essential oils or solvents come into contact primarily with the glass of the tube, which is an advantage. However, with long-term storage of such blends it is advisable to check how the silicone bulb and plastic thread behave with the specific formulation, especially if the dropper remains on the bottle permanently.

The dropper is suitable for use with cosmetic products and meets the relevant legislative requirements; the declaration of conformity is available with the product. An assessment of suitability for contact with food is not available for this closure, so we recommend using it for cosmetic and technical contents.

Bottles with the same type of neck and ready-made bottle + dropper combinations are available in the Handymade range. For your own combination, we recommend verifying the seal and behaviour of the closure with the specific formulation.

Frequently asked questions