Closures DIN18
Glass Dropper, Gold White, 56 mm
White-gold dropper 56 mm is a dropper with a glass tube and 18/410 thread. It screws onto a bottle with the same neck type and turns it into a drop-by-drop dispenser. full description
Lowest price in the last 30 days: €0.68
Total for 1 pcs: €0.68
Product description
White-gold dropper 56 mm is a dropper with a glass tube and 18/410 thread. It screws onto a bottle with the same neck type and turns it into a drop-by-drop dispenser. It is intended mainly for serums, facial and hair oils, essential oil blends and other liquid preparations where a small, precisely measured amount needs to be dispensed without finger contact with the contents.
It is suitable for home production as well as for cosmetics intended for sale or as a gift. The packaging is suitable for use with cosmetic products; the declaration of conformity and related documents are listed with the product.
Why choose a dropper with a glass tube
- Precise dosing – contents are dispensed drop by drop, which is economical with concentrated serums and oils and allows a consistent dose to be repeated.
- Glass tube – glass is chemically stable, does not absorb the scent or colour of the contents, making it suitable for blends with a higher proportion of essential oils that gradually degrade softer plastics.
- Silicone bulb – the pressing part made of silicone withstands oily contents and returns to its original shape after pressing.
- Hygienic dispensing – the contents do not touch fingers or the area around the neck, which reduces the risk of contamination and preserves the preservative system of the preparation.
- Appearance – the white bulb and gold collar look clean and consistent, complementing brown, clear and frosted glass, and suit natural cosmetics as well as bolder label graphics.
How the dropper works and how to use it
The dropper consists of a threaded collar that seals the bottle, a press bulb and a glass tube reaching into the contents. To dispense, the bulb is pressed, the tip of the tube is submerged in the liquid, and when the bulb is released, the tube fills up. The contents are then dispensed by gradually pressing the bulb over the palm or directly onto the skin.
The collar is tightened by hand, without excessive force. Once screwed on, the dropper also seals the bottle, so no additional cap is needed for regular use. Store filled bottles upright; the bulb is not designed to hold the contents when the bottle is lying down.
Choosing the bottle and dropper length
The dropper is intended for bottles with an 18/410 threaded neck. Bottles with the same neck type and ready-made bottle + dropper combinations are available in the Handymade range. When creating your own combination, we recommend checking the collar's seal and the dropper's behaviour with your specific formulation.
Alongside the thread, the tube length is also important. A correctly chosen dropper reaches almost to the bottom of the bottle so that the last of the contents can be dispensed, but does not rest on the bottom or prevent the collar from being fully tightened. A tube that is too short cannot reach the contents at a lower level; one that is too long will press against the bottom and may break or lift the collar.
Fill the bottle to its nominal volume, not to the brim. The total capacity to the brim is greater, and the difference provides space for the dropper tube. Overfilling would cause the contents to overflow when the tube is inserted.
Before ordering a larger quantity, compare the dropper length with the bottle height stated in its parameters. The dropper length is measured from the bottom edge of the collar to the tip of the tube; the bottle is measured from the neck to the base.
Suitable for products such as
- Facial serums on an oil or water base, where a few drops are dispensed per application.
- Facial, hair and nail oils and oily concentrates of active ingredients, where precise and economical dispensing matters.
- Essential oil blends and aromatherapy concentrates, for which a glass tube is more suitable than a plastic one.
- Tinctures and alcohol extracts in small volumes, dispensed drop by drop.
- Technical and laboratory liquids, such as dyes, pigment dispersions or test samples. The dropper is also listed in technical quality.
Good to know
Preparation before first filling. Rinse the dropper before use, disinfect with isopropyl alcohol or ethanol and allow to dry completely. Residual water in the tube would dilute oily contents and could compromise the stability of an anhydrous product.
Reuse. The glass tube and collar can be washed and used again. Clean the dropper thoroughly between different formulations to prevent transferring scent or residues of the previous contents, and check whether the bulb is deformed or hardened.
Contents with solvents. Glass tolerates essential oils and alcohol-based contents without restriction. With a high proportion of essential oils or organic solvents, we recommend checking the silicone bulb's behaviour on a single sample over several weeks. Any potential issue will manifest as softening or a change in shape.
Sealing and air. The dropper seals the bottle adequately for regular use and storage, but is not a hermetic closure. For contents sensitive to oxidation, it helps to fill the bottle to its nominal volume and avoid leaving a large air space in it for extended periods.
The glass tube is fragile. It may break if the bottle is dropped or the collar is overtightened. Do not use a dropper with a cracked or chipped tube, as glass fragments could get into the contents.
Recycling. The dropper is composed of glass, silicone, plastic and aluminium. Before disposal, separate the glass tube from the plastic and aluminium parts and sort each component by material.
Frequently asked questions
Parameters
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
