+421 950 333 113info@handymade.store

Spend over €100 for discounted shipping!

Closures DIN18

Glass Dropper, Matte Black, 57 mm

Black dropper cap 57 mm is a closure with a glass tube and bulb for an 18/410 thread, used to dispense liquid preparations drop by drop directly from the bottle. full description

AvailabilityIn stock · 1211 pcs
Product codeOVK18CM057
€0.62incl. VAT

Lowest price in the last 30 days: €0.62

Volume pricing
1–199 pcs€0.62Your price
200–999 pcs€0.57−8 %
1000–4999 pcs€0.53−15 %
from 5000 pcs€0.46−25 %

Total for 1 pcs: €0.62

Product description

Black dropper cap 57 mm is a closure with a glass tube and bulb for an 18/410 thread, used to dispense liquid preparations drop by drop directly from the bottle. It is suitable for facial serums, oil blends, tinctures, diluted essential oils and other thin products where precise dosing matters. The black cap is opaque, so it conceals the contents in the tube, and it also looks good with a brown or blue pharmaceutical bottle that protects the contents from light.

The dropper consists of a black plastic cap with a thread, a silicone bulb and a glass tube. The packaging is suitable for contact with cosmetic products; a declaration of conformity is included with the product.


Key properties

  • Drop-by-drop dispensing – squeezing the bulb draws a small amount of liquid into the tube, which is then released drop by drop. Dosing is precise and the contents do not spill.
  • Glass tube – glass does not react with oils or alcohol-based tinctures and does not discolour. It is therefore suitable for essential oils and tinctures that would deteriorate a plastic tube over time.
  • Silicone bulb – it is flexible and holds its shape even with repeated squeezing, which is important for products used daily.
  • 18/410 thread – a common neck type for vials and small bottles, so the dropper can be combined with most serum and oil containers of this size.
  • Opaque cap – the contents drawn into the tube beneath the cap are not visible, which looks cleaner with coloured oils and extracts than a transparent dropper.

How to use the dropper

Once the bottle is filled, the dropper is screwed onto the neck and hand-tightened. When dispensing, squeeze the bulb first, submerge the tube in the liquid, then release the bulb to draw up the contents. The drops are then released by gently squeezing over the palm or directly onto the skin. For very thin blends, a light pressure is sufficient; for thicker serums with a higher proportion of glycerin or a thickener, the drops release more slowly and more noticeable pressure is required.

The tube length must match the height of the bottle. A tube that is too short will not reach the bottom and the last few millilitres cannot be drawn up; one that is too long rests on the bottom and the dropper cannot seat fully on the thread. The length of this dropper is stated in the name and in the parameters; when choosing a bottle we recommend comparing it with the bottle's internal height.


Suitable for products such as

  • Facial serums and oil serums – dispensed in amounts of a few drops, making the dropper one of their most common closures.
  • Essential oil blends and diluted aromatherapy oils – the glass tube tolerates essential oils without any change in appearance, and drop-by-drop dispensing is standard for them.
  • Tinctures and alcohol-based extracts – precise dosing and glass in contact with the contents.
  • Oil extracts and concentrated active ingredients in both aqueous and oil carriers, added drop by drop to a finished product.
  • Samples and test batches – the dropper makes it easy to take a small amount for testing without opening the whole bottle.

The dropper is not suitable for thick emulsions, high-viscosity gels or products with solid particles that would clog the tube.


What's good to know

Before first use, we recommend disassembling the dropper, washing the cap and glass tube, disinfecting all parts with isopropyl alcohol or ethanol and allowing them to dry completely. Residual water in the tube would enter an anhydrous oil or serum and affect its stability.

Volume reserve – the bottle is filled to the nominal volume, not to the brim. The dropper tube takes up part of the internal space once screwed in, and without a reserve the contents would overflow through the neck when closing.

Sealing – the dropper is designed for normal use and storage in an upright position. When inverted or during transport it does not seal as reliably as a solid cap. When shipping products we therefore recommend closing the bottle with a solid cap and including the dropper separately, or testing the seal with the specific formulation in advance.

Compatibility with contents – the glass tube is resistant to oils, essential oils and alcohol. The bulb and cap are made of silicone and plastic; with concentrated solvents or undiluted essential oils it is therefore advisable to check whether they change with prolonged contact. With standard cosmetic serums and oils this issue does not arise, as the bulb only comes into contact with the contents during drawing.

The dropper is a closure for products consumed within a few months. Each time the bottle is opened, air enters, and when the tube touches the skin, microorganisms can enter as well. Aqueous serums with a dropper therefore always require a suitable preservation system and the tube should not touch the skin.

Reuse – after thorough washing and drying, the dropper can be used again. If the bulb has lost its elasticity or the tube has broken, the dropper should no longer be used.

Recycling – the dropper consists of three materials. Before disposal, the glass tube is separated from the plastic cap and the silicone bulb, and each part is sorted separately.

Bottles and vials with an 18/410 neck as well as ready-made bottle and dropper combinations are available in the Handymade range. When creating your own combination, we recommend checking the tube length, seal and dropper behaviour with the specific formulation.


Frequently asked questions

Which bottles does the 18/410 dropper fit?
A dropper with an 18/410 thread fits any bottle or vial with the same neck type, as stated in its parameters. In addition to the thread, the tube length must be compared with the bottle height so that the tube reaches almost to the bottom without resting on it. Ready-made, tested bottle and dropper combinations are available in the Handymade range.
Is the dropper with a glass tube suitable for essential oils?
Yes, the glass tube is suitable for essential oils and their blends, as glass does not react with them and does not discolour. The bulb and cap only come into contact with the contents during drawing; with standard diluted blends this is not an issue. With undiluted essential oils, we recommend checking the condition of the bulb after some time.
Can the dropper dispense a thick serum or gel?
The dropper is designed for thin and lightly thickened products. Light serums and oils are drawn up easily; with serums containing a higher proportion of thickener, the drops release more slowly and the bulb needs to be squeezed more firmly. Thick gels, emulsions and products with particles cannot be dispensed with a dropper – a pump or jar is more suitable for these.
Does the dropper seal during transport or in a bag?
The dropper seals during normal use and storage in an upright position, but is not designed for transport lying on its side. When shipping products, we recommend closing the bottle with a solid cap and including the dropper separately. When using your own bottle and dropper combination, it is advisable to test the seal with the specific contents.
How to clean the dropper and reuse it?
The dropper can be reused after washing. The glass tube and cap are washed with warm soapy water; the bulb is rinsed by drawing up and squeezing out clean water several times. All parts are then disinfected with ethanol or isopropyl alcohol and left to dry completely, so that no water enters the new contents.
Why should the bottle with a dropper not be filled to the brim?
The bottle is filled only to the nominal volume because the dropper tube takes up part of the internal space once screwed in. The difference between the nominal volume and the total capacity to the brim is the reserve for the tube and for the expansion of the contents with changes in temperature. If filled to the brim, the contents would overflow through the neck when closing.

Parameters

Product colour
Black
Country of origin
China
Thread type
18/410
Dropper length
57 mm
Product material
GlassPPSiliconePlastic

Product documentation

PDSProduct Data Sheet
Product properties and usagePDF ↓
DrawingTechnical drawing
Packaging drawing with dimensionsPDF ↓
Download all (ZIP)

2 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.