Closures DIN18
Glass Dropper, Matte White Silver, 103 mm
The white-silver matte dropper is a cap with a glass pipette and bulb for bottles with an 18/410 neck, designed for precise drop-by-drop dispensing of liquid preparations. full description
Lowest price in the last 30 days: €0.72
Total for 1 pcs: €0.72
Product description
The white-silver matte dropper is a cap with a glass pipette and bulb for bottles with an 18/410 neck, designed for precise drop-by-drop dispensing of liquid preparations. It is suitable wherever the customer needs to apply small, controlled amounts – for facial serums, oils, tinctures and concentrates of active ingredients.
The dropper consists of several materials: a glass pipette, a silicone bulb, a plastic threaded component made of PP and an aluminium shell. The glass is chemically resistant and does not affect the scent or colour of the contents; the silicone bulb holds its shape and returns to its original form after squeezing. The packaging is suitable for cosmetic products; beyond cosmetics, it can also be used for technical purposes, such as dispensing dyes or samples during recipe development.
Key benefits
- Precise dispensing – the pipette draws the contents drop by drop, so the customer applies only as much as needed.
- Glass pipette – glass does not react with oils, alcoholic extracts or most active ingredients, and is easy to clean.
- Hygienic application – the contents are not handled by fingers or poured through the neck, reducing the risk of contaminating the remaining product.
- Secure closure – the 18/410 thread seals the bottle during normal storage. Before transport, we recommend verifying the seal with the specific contents.
Use and compatibility
The dropper fits bottles with an 18/410 thread. The pipette length is stated in the specifications and should match the height of the bottle. If the pipette is too short, an unusable residue remains at the bottom; if it is too long, the pipette rests against the bottom and risks cracking or deforming the thread. Bottles with the same neck type and ready-made bottle + dropper combinations are available from Handymade.
When assembling your own bottle and dropper combination, check that the pipette ends a few millimetres above the bottom and does not jam when screwed in. It should not press against the bottom.
When filling, there is a difference between the nominal and total volume of the bottle. The nominal volume is the amount the bottle is intended for during normal filling; the total volume up to the brim is greater. The difference is a reserve for the pipette, which displaces some of the contents upwards when screwed in, and for the expansion of the contents when the temperature changes. The bottle should therefore only be filled to the nominal volume; otherwise the contents will overflow through the neck when the dropper is fitted.
Before the first fill, rinse the pipette and bulb with isopropyl alcohol or ethanol and allow to dry completely. Residual moisture could dilute an anhydrous preparation or impair its microbiological stability.
Suitable for products such as
- Facial serums and concentrates on water or oil base, where a few drops are dispensed.
- Oil blends and massage oils in small packages for the face, beard or cuticles.
- Tinctures and alcoholic extracts, for which glass resists ethanol.
- Samples and test batches during recipe development, when small amounts need to be measured precisely.
Good to know
The matte white-silver combination has a discreet appearance and pairs well with brown, blue and matte glass.
The dropper is reusable. After emptying the bottle, rinse the pipette with warm water and a mild detergent or ethanol, squeeze the bulb several times to flush out residual contents, and allow to dry. The bulb is not recommended for prolonged soaking in strong solvents.
For preparations with a high proportion of essential oils or more aggressive solvents, we recommend monitoring whether the bulb changes shape or elasticity over time. The glass is resistant to such contents.
Viscous preparations (thick oils, gels) are drawn up through the pipette more slowly and may not form regular drops. For such products, a pump or a bottle with a flip-top cap is more suitable.
The dropper consists of multiple materials. Before recycling, separate the glass pipette from the bulb and the plastic component with aluminium shell, and dispose of each part separately.
Frequently asked questions
Parameters
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
