Closures DIN18
Glass Dropper, Silver Black, 53 mm
Black-silver dropper for bottles with an 18/410 neck dispenses liquid preparations precisely drop by drop. full description
Lowest price in the last 30 days: €0.68
Total for 1 pcs: €0.68
Product description
Black-silver dropper for bottles with an 18/410 neck dispenses liquid preparations precisely drop by drop. It is suitable wherever accurate measurement of small quantities matters and where pouring directly from the neck is not desirable – for serums, facial and body oils, tinctures or concentrated active blends. The combination of black and silver looks neutral on bottles made of amber, blue and clear glass.
The dropper is suitable for use with cosmetic products.
How the dropper is assembled
The dropper consists of several parts made from different materials, each serving its own function:
- Glass tube – glass does not absorb the scent or colour of the contents and is also suitable for oils and alcohol-based preparations. The length of the tube determines the bottle height the dropper fits.
- Silicone bulb – squeezing it draws in and releases the contents.
- Aluminium cap collar – covers the plastic threaded part and gives the closure a metallic appearance.
- Plastic thread – ensures a tight fit on the neck of an 18/410 bottle.
Which preparations it is suitable for
Drop-by-drop dispensing makes sense for products applied in small amounts. These are typically facial serums with a water or oil base, pure plant and facial oils, oil blends for nails and cuticles, tinctures and herbal extracts, or concentrates of active ingredients that the customer doses into their own cream. The glass tube also withstands preparations containing alcohol or essential oils, which could cause plastic dispensers to deteriorate over time.
The dropper is less suitable for thick emulsions and high-viscosity gels. These cannot be drawn up into the tube or drip from it irregularly. For such textures, a dispensing pump or a jar is a better choice.
Before ordering a larger quantity, verify the dropper length against the height of the chosen bottle. The tube should end just above the bottom so that the last few millilitres can still be drawn up, but must not rest on the bottom. Bottles with an 18/410 neck and ready-made bottle + dropper combinations are available in the Handymade range.
Filling and volume allowance
When using bottles with a dropper, bear in mind that the tube takes up part of the bottle's space. The bottle should therefore be filled to the nominal volume, not to the brim. The difference between nominal and total volume provides the allowance for the submerged tube and for the expansion of the contents when the temperature changes. If the bottle is overfilled, the contents leak around the neck when the cap is screwed on, soiling the thread and causing it to seal poorly.
When using your own bottle and dropper combination, we recommend checking the seal, the smoothness of dispensing and the behaviour of the bulb with the specific formulation. A short test in an inverted position and during transport is sufficient.
Good to know
- Preparation before first use – disassemble the dropper, wash it, disinfect with isopropyl alcohol or ethanol and allow to dry completely. Moisture left in the tube would introduce water into an anhydrous oil or serum.
- Repeated use – after thorough cleaning, both the glass tube and the closure can be reused. Check the bulb regularly to ensure it has not lost its elasticity or cracked.
- Essential oils and solvents – glass is resistant to them. However, with preparations containing a high proportion of essential oils or strong solvents, monitor whether the silicone bulb softens or swells over time.
- Hygiene during dispensing – the tip of the tube must not touch the skin or any other surfaces, otherwise contaminants and microorganisms will be introduced into the bottle. This is especially important with aqueous serums with weaker preservation.
- Waste sorting – the dropper is made up of glass, aluminium, silicone and plastic. Before disposal, separate the individual parts where possible and sort them by material.
Store bottles fitted with a dropper upright. In a horizontal position, the contents remain in the tube and bulb for an extended period and may leak around the neck when opened.
Frequently asked questions
Parameters
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
