PLASTIC JARS
Frosted Plastic Jar with White Lid, 100 ml
Plastic jar with white lid, frosted 100 ml is a set for filling thicker cosmetic products: creams, body butters, balms , masks or scrubs that are scooped out with the fingers or a spatula. full description
Lowest price in the last 30 days: €0.83
Save €1.33 with this set
Total for 1 pcs: €0.83
Quantities add up across all combinations of this bottle.
Product description
Plastic jar with white lid, frosted 100 ml is a set for filling thicker cosmetic products: creams, body butters, balms, masks or scrubs that are scooped out with the fingers or a spatula. The jar, lid and inner liner are made of polypropylene (PP), a lightweight plastic, so the set is suitable for bathroom products, for travel and for shipping to customers. The set includes a white screw lid and an inner liner that is placed on the contents under the lid.
The wall of the jar is clear and frosted, so the contents are only dimly visible through it and you can see how much product is left in the jar. The whole set is declared suitable for contact with cosmetics and Handymade issues an EU declaration of conformity for it. The set is not intended for food. The jar is supplied in cosmetic grade and technical grade. It is therefore also suitable for storing samples of raw materials or semi-finished products in the workshop.
What it is used for
- Creams and body butters – thicker emulsions and whipped butters that cannot be dispensed with a pump and are scooped directly from the jar.
- Balms and solid products – anhydrous balms, ointments made from waxes and oils, or solid deodorants that are poured into the jar while still liquid and left to set.
- Scrubs and masks – salt or sugar scrubs, clay masks and other mixtures with larger particles, where a wide neck is an advantage.
- Samples and test batches – a volume of 100 ml matches a standard face cream pack or a smaller body product. It is suitable for customer samples and for testing a formulation before scaling up production.
Liquid and thin products, such as toners, oils or thin lotions, do not belong in this jar. The wide neck with a lid and liner will not seal liquids, and the contents would leak if the jar were turned upside down or during transport.
Lid, liner and filling
The jar is filled to a nominal volume of 100 ml. The total volume to the brim is larger and you can find it in the parameters. The difference is a reserve for the inner liner and lid and for the expansion of the contents with changes in temperature. If the jar were filled up to the neck, the liner could not be fitted correctly and the product would be pushed out when closing.
After filling, the inner liner is placed directly on the surface of the product. During transport it limits the movement of the product and prevents the cream from spreading over the inside of the lid. After opening, the customer either removes it or puts it back on the contents after each use. The product therefore comes into less contact with air between uses.
The white screw lid is tightened by hand. Closures with the same neck type and ready-made sets are available in the Handymade range. If you are making your own combination, we recommend checking the tightness and behaviour of the packaging with your specific formulation.
Thicker creams and whipped butters are filled into the jar with a spatula or from a piping bag. Level the surface before fitting the liner. The liner then sits flat and no product remains on the lid.
Good to know
- Preparation before the first filling – wash the jar, liner and lid, disinfect them with isopropyl alcohol (IPA) or ethanol and leave them to dry completely. Residual moisture in the packaging is a risk, especially with anhydrous balms and butters.
- Hot mixtures – let melted balms and waxes cool slightly before pouring. With the first batch, check that the wall of the jar does not deform.
- Essential oils and solvents – for formulations with a high proportion of essential oils or solvents, test compatibility with the packaging on a sample. Concentrated substances can damage the plastic over time.
- Reuse – after washing and disinfection, the jar can be filled again. Check the thread and edges before each filling. If a jar has become discoloured or its surface has changed after the previous product, do not use it for a new filling.
- Recycling – all three parts are made of polypropylene with the material code PP 5; after rinsing, they belong in the separate collection for plastics.
Frequently asked questions
Parameters
Frosted Plastic Jar, 100 ml
White Plastic Lid for Frosted Jar, 100 ml, 63 mm
Plastic Gasket for Frosted Jar, 100 ml, 63 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.





