Closures DIN28
White All-Plastic Trigger Sprayer, 28/410
The lever sprayer is an all-plastic dispensing closure with a 28/410 neck finish that turns an ordinary bottle into a practical sprayer for larger surfaces. full description
Lowest price in the last 30 days: €0.85
Total for 1 pcs: €1.06
Product description
The lever sprayer is an all-plastic dispensing closure with a 28/410 neck finish that turns an ordinary bottle into a practical sprayer for larger surfaces. Pressing the lever disperses the contents into a fine mist, making it suitable wherever a liquid product needs to be applied quickly and evenly – on skin, hair, fabric, surfaces or plants.
Compared to a standard sprayer with a small nozzle head, the lever sprayer delivers a larger dose per press and is more comfortable to hold, which is why it is used mainly on larger-volume bottles. The all-plastic construction in polypropylene (PP) with no metal parts means there is no spring in the closure that could corrode with water-based or mildly acidic contents. The sprayer is suitable for use with cosmetic products and also meets technical-grade quality, so it can be used for common cleaning and technical solutions around the home or workshop.
What the lever sprayer is suitable for
- Water and hydrosol sprays – refreshing mists for body and hair, hydrosol sprays in larger packaging.
- Hair care – rinses, leave-in conditioners with low viscosity, detangling solutions.
- Fabric and room – sprays for laundry, pillows and interiors on a water-alcohol base.
- Household cleaning products – solutions for windows, bathroom or kitchen, homemade vinegar and soap cleaners.
- Garden and plants – misting leaves, applying infusions and auxiliary solutions.
How to use it
The sprayer is screwed onto a bottle with a 28/410 neck. On first use, press the lever several times without dispensing until the tube fills and the liquid pushes air out of the mechanism. The dose per press is stated in the product parameters. When calculating product consumption, treat this as an approximate value – the actual amount depends on the viscosity of the contents and the force of the press.
The tube is supplied at a length for taller bottles. If the bottle is shorter, the tube should be cut with a sharp knife to the height of the bottle so that its end just touches the bottom. A slightly angled cut prevents the tube from suctioning against the bottom and stopping the draw. The bottle should not be filled to the brim – a gap should remain below the neck for the tube and the lower part of the mechanism, otherwise the contents will overflow when screwing on.
The lever sprayer works reliably with contents that have a water-like viscosity. Thick gels, oils and creamy textures will not pass through it or will spray unevenly – a pump dispenser is more suitable for those.
Good to know
Before the first fill, we recommend rinsing the sprayer with clean water or a solution of isopropyl alcohol or ethanol and allowing it to dry. For repeated use, flush the mechanism with water by spraying through several times. Residues from the previous contents could otherwise clog the nozzle or contaminate the new product.
Polypropylene handles water, alcohol, weak acids and bases well, as commonly found in cosmetics and household cleaners. For products with a high proportion of essential oils, strong solvents or aggressive chemicals, check the closure's compatibility with the specific formulation – the material may soften or the nozzle may clog over time. The sprayer is not an airtight closure, so any water-based product intended for skin application must be properly preserved.
The white closure is colour-neutral and suits most bottles. The sprayer as a whole is made from a single material, PP 5, so it can be recycled as plastic without separating any metal parts.
Bottles with the same neck type and ready-made bottle + sprayer combinations are available in the Handymade range. For a custom combination, we recommend verifying the seal, dosage and packaging behaviour with the specific formulation.
A bottle fitted with a lever sprayer should not be stored or transported on its side. The mechanism is not designed to seal when tilted and the contents may leak through the nozzle.
Frequently asked questions
Parameters
- Product colour
- White
- Country of origin
- European Union
- Diameter
- 91,9 x 32,3 mm
- Thread type
- 28/410
- Height
- 63 mm
- Tube length
- 294 mm
- Dose
- 1,3 ml
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
