+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

Closures DIN18

White Flip Top Cap, 18/410

Plastic flip top cap 18/410 seals bottles and small bottles with an 18/410 neck and dispenses the contents through a small opening by flipping the lid, without unscrewing. full description

AvailabilityIn stock · 42 pcs
Product codeOVV18PB1
€0.23incl. VAT

Lowest price in the last 30 days: €0.23

Volume pricing
1–199 pcs€0.23Your price
200–999 pcs€0.21−8 %
1000–4999 pcs€0.20−15 %
from 5000 pcs€0.17−25 %

Total for 1 pcs: €0.23

Product description

Plastic flip top cap 18/410 seals bottles and small bottles with an 18/410 neck and dispenses the contents through a small opening by flipping the lid, without unscrewing. It is best suited for liquid and medium-viscosity products in squeeze bottles: body and hair oils, lighter facial serums, gels, toning waters, cleansing gels or liquid soaps in travel sizes.

The cap is made of polypropylene (PP), which is lightweight, resistant to breakage and handles repeated opening and closing of the hinge well. The white colour looks neutral, so it combines well with both white and transparent bottles and lets the label stand out. The cap is suitable for use with cosmetic products and meets the relevant legislative requirements. A declaration of conformity is available with the product.


Why choose a flip top

  • One-handed dispensing – flip the lid with your thumb, squeeze the product and close. In the shower or with oily hands, this is more practical than unscrewing.
  • Quantity control – the smaller dispensing opening limits how much product comes out at once. With oils and serums, this helps prevent waste.
  • Cleaner neck – the contents come into contact with the thread less often than with a standard cap, so less product dries on it.
  • Easy pairing – the cap fits all bottles with an 18/410 neck in the Handymade range. Ready-made bottle + cap combinations have their own description in the e-shop.

Which products and bottles is it suitable for

The flip top works best on squeeze plastic bottles, where you dispense the product by pressing on the walls of the container. Suitable formulations range from liquid to medium viscosity: oils, light serums, micellar waters, gels, shampoos and shower gels in small volumes, liquid soaps, or thicker lotions. With very thin water-based products, keep in mind that they tend to flow out easily when the bottle is inverted. With thick creams and butters, the flow through the small opening is limited and a jar or wider neck is more suitable.

The cap also fits glass bottles with an 18/410 neck. However, dispensing is by tilting rather than squeezing, so it is better suited for liquid oils and waters.

When using your own bottle and cap combination, check the seal when filled before production filling. Fill the container, close it, place it on its side and leave it for several hours. This will tell you whether the formulation leaks with that particular neck.


What is good to know when working with the cap

Before first use, wash the cap in warm water with a mild cleaning agent, or disinfect with isopropyl alcohol or ethanol and allow to dry completely. Moisture trapped under the lid or in the thread can affect the microbiological purity of the filled product.

Polypropylene resists most cosmetic raw materials well, including vegetable oils and aqueous solutions. For formulations with a higher proportion of essential oils, alcohol or solvents, we recommend verifying the behaviour of the material in the specific formulation with a longer-term test.

The cap can be reused. After emptying the bottle, simply wash it, remove any product residue from the dispensing opening and hinge, and dry. When significantly changing the formulation — for example from a scented oil to an unscented product — it is better to use a new cap to avoid transferring residual fragrance.

When closing, do not overtighten the cap with excessive force. The 18/410 thread is delicate and over-tightening can damage the thread of the bottle or deform the seating surface, which will worsen the seal.

The flip top is not intended for products that need to be protected from access by children, nor for substances where demonstrable integrity at first opening is required. For such use, opt for caps with a safety lock or tamper-evident ring.

At the end of its service life, the cap belongs in the sorted waste designated for plastics.


Frequently asked questions

Which bottles does the plastic flip top cap 18/410 fit?
The cap fits any bottle or small bottle with an 18/410 neck, regardless of material or volume. The designation 18/410 describes the neck diameter and thread type, so it is essential that the bottle has the same neck code listed in its specifications. A selection of bottles with this neck is available in the Handymade range.
Is the flip top cap suitable for oils and serums?
Yes, liquid oils and serums of lighter to medium consistency are among the most suitable products for a flip top. The small dispensing opening allows you to squeeze out a few drops without spilling and the contents are dispensed conveniently with one hand. With very thick serums with a high proportion of gelling agents, however, the flow through the opening may be slow.
Can the flip top cap be used for water-based products, such as toners?
It can, but with thin water-based products expect more leakage. They have low viscosity and when the bottle is inverted or squeezed, more flows out of the opening than is usually desirable for a toner. For gentle application of water-based products, a spray is usually more suitable; the flip top is better suited for toners when dispensing onto a cotton pad.
How is the flip top cap cleaned before reuse?
Wash the cap in warm water with a mild cleaning agent, rinse the dispensing opening and the area under the lid, and allow to dry completely. For greater microbiological cleanliness, wipe it with isopropyl alcohol or ethanol. Before refilling, check that the hinge and seating surface are not damaged.
Does the polypropylene cap withstand essential oils?
Polypropylene is among the plastics with good chemical resistance and tolerates common concentrations of essential oils in cosmetics. For products with a high proportion of essential oils, pure fragrance compositions or formulations with solvents, we recommend verifying resistance with a longer-term test, as concentrated aromatic substances can soften or discolour the plastic over time.

Parameters

Product colour
White
Country of origin
China
Diameter
20,4 mm
Thread type
18/410
Height
18,8 mm
Product material
PPPlastic

Product documentation

PDSProduct Data Sheet
Product properties and usagePDF ↓
Download all (ZIP)

1 PDF file in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.