Closures DIN24
White Lotion Pump With Overcap, 24/410, Glossy Gold, 200 mm
The plastic dispenser with cap 24/410 is a white and gold pump used to dispense liquid or semi-liquid contents from a bottle without unscrewing the closure. full description
Lowest price in the last 30 days: €0.83
Total for 1 pcs: €0.83
Product description
The plastic dispenser with cap 24/410 is a white and gold pump used to dispense liquid or semi-liquid contents from a bottle without unscrewing the closure. It is suitable for serums, lotions, light emulsions, liquid soaps and cleansing gels, that is, products that are used repeatedly and where clean and precise dispensing matters. The white body with a metallic gold collar looks neat on the shelf and can be combined with white, clear and dark bottles.
The dispenser comes with a cap that covers the head and protects it from dust and from accidental pressing during transport. It fits bottles with a 24/410 neck. The dip tube is long and should be trimmed before use according to the height of the particular bottle.
Key benefits
- Hygienic dispensing – the contents are taken from the bottle without opening it and without the fingers touching the product, which you will appreciate especially with water-based and emulsion formulations sensitive to contamination.
- Small dose – one press releases roughly 0.2 ml, so the dispenser is suitable for serums and products used in small amounts. For body lotions you simply press several times.
- Head cap – protects the dispenser outlet from dirt and from product residue drying out, and prevents the contents from being squeezed out unintentionally during transport.
- Polypropylene with an aluminium collar – the plastic parts are light and impact-resistant, and the gold collar gives the packaging a more refined look without changing its function.
- Verified suitability for cosmetics – according to the technical documentation the packaging material is suitable for use with cosmetic products. A declaration of conformity is available with the product.
Which products it suits
The dispenser works best with low to medium viscosity contents: serums, toners with a higher thickener content, moisturising lotions, light emulsions, liquid soaps, shampoos and cleansing gels. Thick creams, butters and balms with a high wax content will not be drawn up by the dispenser or will clog it over time. For those, jars or pots are more suitable. Watery contents without a thickener, such as pure hydrosols or facial waters, the dispenser can handle, but for those a spray is usually more practical.
With higher-viscosity emulsions it pays to first fill one test bottle and check whether the dispenser draws up the contents smoothly even after several days of standing. If the dose weakens, reduce the thickener content or choose a dispenser intended for creams.
Good to know
- Choosing a bottle – the dispenser fits all bottles with a 24/410 neck in the Handymade range. With your own combination we recommend checking the seal, the correct drawing up of the contents and the behaviour of the packaging with the particular formulation. Ready-made bottle + dispenser sets can be found separately in the range.
- Trimming the tube – the dip tube is intentionally long so it can be used with various bottle heights. Cut it with sharp scissors at an angle, just above the bottom of the bottle, so that the contents can be pumped out as fully as possible.
- Residue in the bottle – the dispenser never pumps out absolutely everything, a little of the contents remains below the end of the tube. Take this into account with the declared package volume.
- Preparation before first filling – the dispenser is intended for direct use. For production for customers we recommend disinfecting the head and tube before filling with isopropyl alcohol or ethanol and letting them dry completely.
- Compatibility with the contents – polypropylene is commonly resistant to water-based and emulsion formulations. With contents containing a high proportion of essential oils, concentrated fragrance compositions or solvents it is advisable to verify the long-term stability of the packaging.
- Reuse – the dispenser can be used again after thorough rinsing with warm water and pumping clean water through it. For products for customers, however, we recommend always using a new dispenser.
- Recycling – the dispenser is a combination of plastic and aluminium; when disposing of it, follow the material marking and the sorting rules in your area.
The dispenser has documented suitability for cosmetic products, not for food. For homemade oils or syrups, choose packaging certified for food contact.
Frequently asked questions
Parameters
- Country of origin
- European Union
- Diameter
- 27,5 mm
- Thread type
- 24/410
- Height
- 45 mm
- Tube length
- 220 mm
- Dose
- 0,2 ml
