+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

Closures DIN18

White Matte Glass Dropper, 71 mm

White matte dropper, 71 mm White matte dropper is a dosing closure for bottles with an 18/410 neck. full description

AvailabilityIn stock · 1218 pcs
Product codeOVK18BM071
€0.51incl. VAT

Lowest price in the last 30 days: €0.51

Volume pricing
1–199 pcs€0.51Your price
200–999 pcs€0.47−8 %
1000–4999 pcs€0.43−15 %
from 5000 pcs€0.38−25 %

Total for 1 pcs: €0.51

Product description

White matte dropper, 71 mm

White matte dropper is a dosing closure for bottles with an 18/410 neck. It allows dispensing small amounts of liquid drop by drop, making it suitable for products applied in a few drops – facial serums, cosmetic oils or tinctures. The dropper length in the name helps select the correct bottle height so that the glass tube reaches just above the bottom and draws out the contents to the end.


What it consists of and how it works

The dropper consists of three parts: a threaded cap made of polypropylene (PP), a squeeze bulb made of silicone, and a glass tube. Squeezing the bulb expels air from the tube; when released, the contents are drawn in and then dispensed drop by drop with gentle pressure. The glass is resistant to cosmetic oils, alcohol-based solutions and water serums, and does not absorb scent or colour, so the dropper can be used for a different type of contents after cleaning.

  • Precise dosing – contents are drawn out drop by drop, which suits concentrated preparations applied in small amounts.
  • Hygienic use – contents do not come into contact with fingers or the bottle neck, reducing the risk of contamination of leave-on products.
  • Glass tube – suitable for oils and alcohol-based tinctures, does not cloud and does not react with common cosmetic ingredients.
  • Matte white cap – neutral appearance that can be combined with white, clear or dark glass.

Use with a bottle

The dropper screws onto a bottle with an 18/410 neck. Bottles with the same neck type and ready-made bottle + dropper combinations are available in the Handymade range. When combining your own, we recommend checking the seal, the tube length against the bottle height, and the behaviour with your specific formulation.

The bottle is filled to the nominal volume, not to the brim. The nominal volume is the amount for which the packaging is designed for normal filling. The total volume up to the neck is greater, and the difference provides a reserve for the dropper, which occupies part of the neck space when screwed in, and for the expansion of the contents with temperature changes. If the bottle is overfilled, the contents will overflow when the dropper is fitted.

Before the first fill, disassemble the dropper into three parts, wash, disinfect with ethanol or isopropyl alcohol and allow to dry completely. Residual water in the tube would cause cloudiness in an oil-based product.


Suitable for products such as

  • Facial and eye serums – water-based and oil-based, applied drop by drop to clean skin.
  • Facial and hair oils – vegetable oils and their blends, oil extracts, cuticle serums.
  • Essential oil blends in a carrier oil – diluted blends for massage or spot application.
  • Tinctures and alcohol extracts – glass and alcohol are compatible, the dropper enables precise dosing.
  • Concentrates and active solutions – for example acid or vitamin solutions added to a base drop by drop.

Good to know

The silicone bulb is resistant to common cosmetic ingredients. During normal use, the contents remain in the tube and do not come into contact with the bulb. With undiluted essential oils or strong solvents, we recommend testing the dropper's behaviour in advance on a single unit and checking whether the bulb holds its shape and seals properly.

With lower-viscosity products, a small amount of contents may get into the bulb when the bottle is turned upside down. We therefore recommend storing and transporting the bottle upright and always tightening the dropper after use.

The glass tube is fragile; if dropped onto a hard surface, the tip may break off. We therefore recommend checking it before each fill.

Tighten the dropper only once the label adhesive on the bottle has dried – when screwing on, a fresh label can easily shift.

The packaging material is suitable for use with cosmetic products; a declaration of conformity is available with the product.


Frequently asked questions

Which bottle does the 18/410 dropper fit?
The 18/410 dropper fits any bottle with an 18/410 neck. The number 18 indicates the neck diameter and 410 indicates the thread type. In addition to the thread, the dropper length must also be matched to the bottle height so that the tube ends just above the bottom. The dropper length is stated in its name; bottle heights can be found in their specifications.
Is the glass dropper suitable for essential oils?
The glass tube is, as essential oils do not affect it. The silicone bulb requires attention; during normal use it does not come into contact with the contents. With diluted blends in a carrier oil, use is unproblematic. With pure essential oils, we recommend storing the bottle upright and testing the dropper's behaviour in advance.
Can the dropper be reused?
Yes, the dropper is designed for repeated use. Before each refill, disassemble it into the cap, bulb and tube, wash with warm water and a mild cleaning agent, rinse with ethanol to remove oily residue, disinfect and allow to dry. Before each fill, it is advisable to check that the tip of the tube is not chipped and that the bulb seals properly.
Why is a bottle with a dropper not filled to the brim?
A bottle with a dropper is filled to the nominal volume because the dropper occupies part of the neck space when screwed in and the contents would overflow. The nominal volume is stated in the bottle's specifications. The difference between the nominal and total volume provides a reserve for the dropper tube and for the expansion of the contents with temperature changes.
Is the dropper suitable for water-based serums and tinctures?
Yes, the dropper can be used for water-based serums, alcohol-based tinctures and oils. Glass does not react with any of these contents and does not absorb scent. With water-based products, it is important that the dropper is completely dry and clean before filling, as it comes into contact with the contents of a leave-on product each time it is used.

Parameters

Product colour
White
Country of origin
China
Thread type
18/410
Dropper length
71 mm
Product material
GlassPPSiliconePlastic

Product documentation

PDSProduct Data Sheet
Product properties and usagePDF ↓
DrawingTechnical drawing
Packaging drawing with dimensionsPDF ↓
Download all (ZIP)

2 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.