PLASTIC BOTTLES
White Plastic Bottle, White Disc Top, 300 ml
Pack size100 ml150 ml200 ml250 ml300 ml
The white plastic bottle with a volume of 300 ml and a white disc top cap is a ready-made packaging solution for liquid and creamy cosmetic products that are dispensed with one hand straight from the bottle. full description
Lowest price in the last 30 days: €0.95
Total for 1 pcs: €0.95
Quantities add up across all combinations of this bottle.
Product description
The white plastic bottle with a volume of 300 ml and a white disc top cap is a ready-made packaging solution for liquid and creamy cosmetic products that are dispensed with one hand straight from the bottle. White PET lets less light through to the contents than clear plastic, and the bottle is lightweight and does not break when dropped, so it also holds up in the shower or in a travel bag. The set is declared suitable for contact with cosmetics.
How to use the set
The bottle and the cap have the same 24/410 neck finish, so the cap screws directly onto the neck without any additional parts. The disc top opens by pressing one side of the disc, which exposes the outlet opening. Pressing the opposite side closes the opening again. The contents are dispensed by turning the bottle upside down and squeezing its walls, and the PET returns to its shape when released.
Products with the consistency of a shampoo or body lotion are dispensed best through a disc top. Very thin, watery liquids run out of the opening quickly and are harder to measure. Thick creams and masks, on the other hand, are difficult to push through a small opening. For thicker emulsions, we recommend testing the dispensing before you fill an entire batch.
What it is suitable for
- Shampoos and shower gels – liquid surfactant-based products flow smoothly through the disc top, and the packaging closes with a single press after use.
- Conditioners and body lotions – medium-thick emulsions, where a slight squeeze of the bottle is enough for one dose.
- Liquid hand soaps – without a pump, with fewer parts to clean.
- Body and massage oils with higher viscosity – with thin oils, expect a faster flow and check whether the dispensing suits you.
When choosing packaging for a finished product, fill a trial bottle, close it and leave it lying on its side for a few days. You will find out whether the disc top seals properly for your particular consistency and whether the contents collect in the opening.
Nominal and total volume
The nominal volume of 300 ml is the amount the bottle is designed for during normal filling. The physical volume up to the rim of the neck is higher, and the difference serves as a reserve for the cap and for the expansion of the contents when the temperature changes. The bottle should therefore be filled to the nominal volume, not to the rim. If it were filled up to the neck, part of the contents would be pushed into the thread when the cap is screwed on, and the disc top could leak.
Good to know
Before the first filling, wash the bottle and the cap, disinfect them and leave them to dry completely. Fill emulsions, gels and liquid soaps only after they have cooled to room temperature. Hot filling is not recommended for PET, as the heat can deform the wall of the bottle.
Do not expose the packaging to aggressive chemicals. Resistance to specific ingredients, such as a high proportion of essential oils or alcohol, is not declared for this packaging. Check how the bottle and the cap behave with such a formulation in a stability test.
The bottle is made of PET and the cap of PP. Both materials are recycled as plastics. Separate them before disposal. When reusing the packaging, wash both parts in warm water with a cleaning product, disinfect them and dry them.
Only the bottle on its own has a certificate for direct contact with food. The disc top cap does not have one, so the set as a whole is intended for cosmetics.
If the disc top does not suit you, you will find closures with the same neck finish, as well as ready-made bottle and closure combinations, in the Handymade range. If you make your own combination, we recommend checking the seal, the dispensing and the behaviour of the packaging with your specific formulation.
Frequently asked questions
Parameters
Plastic bottle, white, 24/410, without cap, 300 ml
Plastic cap, 24/410, disc top, white
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.




























































