AMBER GLASS BOTTLES DIN28
Amber Round Sirup Glass Bottle, Black Cap & Pourer, 500 ml
Pack size50 ml100 ml150 ml200 ml250 ml300 ml500 ml1 l
A bottle for repeatedly pouring larger amounts of oil, hydrosol or tincture without liquid running down the thread. full description
Lowest price in the last 30 days: €1.64
Save €0.02 with this set
Total for 1 pcs: €1.64
Quantities add up across all combinations of this bottle.
Add 34 more pcs and the price drops to €1.57/pc.
Product description
A bottle for repeatedly pouring larger amounts of oil, hydrosol or tincture without liquid running down the thread. The set consists of an amber glass medicine bottle with a volume of 500 ml and a black plastic cap with a pourer insert. Amber glass reduces the amount of light reaching the contents and helps protect oils, tinctures and water-based preparations that are sensitive to light. The insert in the neck guides the stream when pouring, so the contents are dispensed in smaller amounts and run down the thread less.
The set is suitable for liquid cosmetic products in larger packs: massage and body oils, hair oils, hydrosols, facial waters and toners, alcohol extracts or bath bases. The 500 ml volume suits home production for several weeks as well as salon work, where smaller containers are refilled from the bottle.
What it is suitable for
- Massage and body oils – a larger pack from which you can pour comfortably into your palm or a bowl.
- Hydrosols and facial waters – amber glass limits the amount of light reaching water-based preparations with plant ingredients.
- Alcohol tinctures and extracts – glass does not react with the contents and does not absorb their scent or colour.
- Salon bulk supply – smaller spray bottles and bottles for daily work are refilled from the half-litre bottle.
Volume and filling
Nominal volume is the amount the bottle is designed for under normal filling. The brimful capacity is the physical volume up to the neck, and you can find it in the parameters. The difference between the two values leaves room for the cap with its insert and for the contents to expand when the temperature changes.
Fill up to the nominal volume. If you fill up to the neck, the pourer insert pushes part of the contents onto the thread, where it then becomes sticky and makes opening difficult.
Cap with pourer insert
The black cap made of polypropylene closes the bottle with a 28 mm thread. The pourer insert fitted in the neck narrows the opening. When the bottle is tilted, the contents flow in a continuous stream, which you stop by returning the bottle to an upright position. The insert is not a substitute for a dropper. For dispensing by the drop, for example with essential oils, choose a smaller bottle with a dropper.
Thin and medium-thick liquids flow smoothly through the insert. For thicker oil blends or gel products, we recommend checking in advance that the contents pass through the insert.
Good to know
Before the first filling, wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water would dilute an anhydrous product and, in water-based preparations, increases the risk of microbial contamination.
The declaration of suitability for direct contact with food and with cosmetic products applies to the glass bottle. The cap with the pourer insert does not have such a declaration, so we do not list the set as a whole as approved for food. The set is intended for cosmetic products, and the declared suitability for contact with cosmetics applies to the bottle.
Glass does not tolerate sudden changes in temperature well. Let a hot oil phase or hydrosol cool down before filling, and do not wash the bottle alternately in very hot and cold water.
After thorough washing and disinfection, the bottle can be reused. For the cap, check that the insert sits firmly in the neck and that the thread seals properly. After prolonged contact with the contents, check that the plastic has not softened or changed colour. The bottle is sorted as glass, the cap with the insert as plastic.
Closures with the same neck type and other ready-made combinations of a bottle with a closure can be found in the Handymade range. If you combine components yourself, check the tightness, dispensing and behaviour of the packaging with your specific formulation.
Frequently asked questions
Parameters
Glass bottle, medicine bottle, PP28S, 500 ml
- Product colour
- Brown
- Country of origin
- European Union
- Nominal capacity
- 500
- Brimful capacity
- 520 ml
- Diameter
- 76,8 mm
- Thread type
- PP28S
- Height
- 176,8 mm
- Product material
- Glass
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
















