+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

PLASTIC BOTTLES

Brown Plastic Bottle, 28/410 Black Shaped Plastic Flip Top, 150 ml

Pack size150 ml1000 ml

A ready-made set for dispensing shampoos, gels and lotions with a single press: an amber plastic medicine bottle with a volume of 150 ml and a black shaped flip top cap with the same thread. full description

AvailabilityPre-order
Product codeO28PH150-OVV28PC7
€0.61incl. VAT

Lowest price in the last 30 days: €0.61

Pre-orderThis variant is currently out of stock — your order will be a pre-order and delivery may take longer.
Volume pricing
1–413 pcs€0.61Your price
414–1241 pcs€0.56−8 % · 1× plato
1242–5381 pcs€0.52−15 % · 3× plato
from 5382 pcs€0.46−25 % · 13× plato

Total for 1 pcs: €0.61

Quantities add up across all combinations of this bottle.

Product description

A ready-made set for dispensing shampoos, gels and lotions with a single press: an amber plastic medicine bottle with a volume of 150 ml and a black shaped flip top cap with the same thread. The amber tint of the PET reduces the amount of light reaching the contents, and the bottle itself is lightweight. The cap is flipped open with a thumb, the dose is dispensed by squeezing the bottle, and the lid snaps back shut, so the closure does not need to be unscrewed or put aside. Products packaged this way are dispensed straight into the palm: shampoos, shower gels, conditioners, body lotions or facial cleansing gels. The set is declared suitable for contact with cosmetics.


What the set is suitable for

  • Rinse-off products – shampoos, shower gels, liquid soaps and conditioners with a liquid to medium-thick consistency. The bottle can be operated with one hand in the shower.
  • Body and face lotions – lighter emulsions pass through the opening in the cap smoothly. With thicker textures, check that the dose can be dispensed without squeezing too hard.
  • Massage and body oils – the flip top limits leakage compared with an open neck, and the oil can be poured into the palm in small doses.
  • Hydrosols and toners for cotton pads – thin liquids flow out quickly, so squeeze the bottle only lightly.
  • Travel and trial size – a volume of 150 ml is enough for trying out a new recipe or for a smaller batch.

Nominal and total volume

The 150 ml figure is the nominal volume, that is, the amount the bottle is designed for in normal filling. The total brimful volume is the physical capacity up to the neck and is always somewhat larger. The difference provides a reserve for the cap and for the expansion of the contents when the temperature changes. Fill to the nominal volume, not to the brim. If you fill up to the neck, the contents will overflow when the bottle is closed or will be pushed out through the opening in the cap when warmed.


Dispensing and leak-tightness

The flip top has a hinged lid with an opening through which the product is pushed out by squeezing the body of the bottle. The size of the dose depends on the viscosity of the contents and on how hard you squeeze, so very thin liquids will come out in larger amounts than a gel. The bottle and the cap have the same 28/410 neck finish, but the final behaviour is also affected by the formulation itself.

Before filling the whole batch, fill one bottle with the finished product, close it, lay it on its side and then turn it upside down. After several hours, check that neither the thread nor the snapped-shut lid leaks.


Good to know

  • Preparation before first filling – wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water in the neck will get into the product.
  • Temperature of the contents – PET is not intended for filling with hot contents. Let emulsions and gels cool down before filling.
  • Concentrated essential oils and solvents – finished cosmetics with a usual share of fragrance components are commonly packed in PET. With concentrated essential oils, alcohol tinctures and products containing solvents, test one bottle before longer storage, as PET should not be exposed to aggressive chemicals.
  • Reuse – after washing and disinfection, the set can be filled again. Check the hinge of the lid and that the opening is not blocked.
  • Recycling – the bottle is made of PET and the cap of PP. Before disposal, unscrew the cap and sort both parts as plastic.

Only the bottle has a certificate for direct food contact; the cap does not. The set as a whole is therefore intended for cosmetics, and we do not recommend it for homemade syrups or cooking oils.


Frequently asked questions

Does a 150 ml amber plastic bottle protect the contents from light?
The amber tint of the PET reduces the amount of light reaching the contents, but it does not provide complete protection from light. For products with sensitive ingredients, such as vegetable oils prone to oxidation or certain active ingredients, an amber bottle is more suitable than a clear one. Even so, do not leave the filled packaging on a sunny windowsill or in a hot car.
Is the plastic bottle with a flip top filled to the brim?
No, the bottle is filled to the nominal volume of 150 ml. The space above this level up to the neck is a reserve for the cap and for the expansion of the contents when the temperature changes. If you fill to the brim, the contents will overflow when the bottle is closed and may be pushed out through the opening in the cap when warmed in the bathroom.
Is the bottle and flip top cap set suitable for food?
The set as a whole is not approved for contact with food. Only the amber bottle has a certificate for direct food contact; the black flip top cap does not have this declaration. The bottle and cap set is declared for cosmetic products, and we do not recommend it for edible oils, syrups or drinks.
Does the flip top cap also work with thick creams or oils?
The flip top works best with liquid and medium-thick products; thick creams are difficult to push out through the opening. Light emulsions, lotions, gels and oils pass through the opening without problems. With thicker textures, test a filled bottle and, if needed, choose another type of closure from the Handymade range with the same 28/410 neck finish.
Can a 150 ml plastic bottle with a cap be reused?
Yes, after thorough washing and disinfection, the set can be filled again. Rinse the bottle and the cap with warm water and a cleaning product, disinfect them with isopropyl alcohol or ethanol and leave them to dry. Before the next use, check the hinge of the lid and that the opening is not blocked, as dried product in the opening changes the size of the dose.

Parameters

Plastic bottle, pharmaceutical, brown, 28/410, 150 ml

Product colour
Brown
Country of origin
European Union
Nominal capacity
150
Diameter
51,2 mm
Thread type
28/410
Height
120,7 mm
Product material
PETPlastic

Plastic cap, 28/410, black, shaped flip top

Product colour
Black
Country of origin
European Union
Diameter
30 mm
Thread type
28/410
Height
23,3 mm
Product material
PPPlastic

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic bottle, pharmaceutical, brown, 28/410, 150 ml · O28PH150PDF ↓
PDSProduct Data Sheet
Plastic bottle, pharmaceutical, brown, 28/410, 150 ml · O28PH150PDF ↓
Plastic cap, 28/410, black, shaped flip top · OVV28PC7PDF ↓
Download all (ZIP)

3 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.