PLASTIC BOTTLES
Brown Plastic Bottle, 28/410 Black Shaped Plastic Flip Top, 150 ml
Pack size150 ml1000 ml
A ready-made set for dispensing shampoos, gels and lotions with a single press: an amber plastic medicine bottle with a volume of 150 ml and a black shaped flip top cap with the same thread. full description
Lowest price in the last 30 days: €0.61
Total for 1 pcs: €0.61
Quantities add up across all combinations of this bottle.
Product description
A ready-made set for dispensing shampoos, gels and lotions with a single press: an amber plastic medicine bottle with a volume of 150 ml and a black shaped flip top cap with the same thread. The amber tint of the PET reduces the amount of light reaching the contents, and the bottle itself is lightweight. The cap is flipped open with a thumb, the dose is dispensed by squeezing the bottle, and the lid snaps back shut, so the closure does not need to be unscrewed or put aside. Products packaged this way are dispensed straight into the palm: shampoos, shower gels, conditioners, body lotions or facial cleansing gels. The set is declared suitable for contact with cosmetics.
What the set is suitable for
- Rinse-off products – shampoos, shower gels, liquid soaps and conditioners with a liquid to medium-thick consistency. The bottle can be operated with one hand in the shower.
- Body and face lotions – lighter emulsions pass through the opening in the cap smoothly. With thicker textures, check that the dose can be dispensed without squeezing too hard.
- Massage and body oils – the flip top limits leakage compared with an open neck, and the oil can be poured into the palm in small doses.
- Hydrosols and toners for cotton pads – thin liquids flow out quickly, so squeeze the bottle only lightly.
- Travel and trial size – a volume of 150 ml is enough for trying out a new recipe or for a smaller batch.
Nominal and total volume
The 150 ml figure is the nominal volume, that is, the amount the bottle is designed for in normal filling. The total brimful volume is the physical capacity up to the neck and is always somewhat larger. The difference provides a reserve for the cap and for the expansion of the contents when the temperature changes. Fill to the nominal volume, not to the brim. If you fill up to the neck, the contents will overflow when the bottle is closed or will be pushed out through the opening in the cap when warmed.
Dispensing and leak-tightness
The flip top has a hinged lid with an opening through which the product is pushed out by squeezing the body of the bottle. The size of the dose depends on the viscosity of the contents and on how hard you squeeze, so very thin liquids will come out in larger amounts than a gel. The bottle and the cap have the same 28/410 neck finish, but the final behaviour is also affected by the formulation itself.
Before filling the whole batch, fill one bottle with the finished product, close it, lay it on its side and then turn it upside down. After several hours, check that neither the thread nor the snapped-shut lid leaks.
Good to know
- Preparation before first filling – wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water in the neck will get into the product.
- Temperature of the contents – PET is not intended for filling with hot contents. Let emulsions and gels cool down before filling.
- Concentrated essential oils and solvents – finished cosmetics with a usual share of fragrance components are commonly packed in PET. With concentrated essential oils, alcohol tinctures and products containing solvents, test one bottle before longer storage, as PET should not be exposed to aggressive chemicals.
- Reuse – after washing and disinfection, the set can be filled again. Check the hinge of the lid and that the opening is not blocked.
- Recycling – the bottle is made of PET and the cap of PP. Before disposal, unscrew the cap and sort both parts as plastic.
Only the bottle has a certificate for direct food contact; the cap does not. The set as a whole is therefore intended for cosmetics, and we do not recommend it for homemade syrups or cooking oils.
Frequently asked questions
Parameters
Plastic bottle, pharmaceutical, brown, 28/410, 150 ml
- Product colour
- Brown
- Country of origin
- European Union
- Nominal capacity
- 150
- Diameter
- 51,2 mm
- Thread type
- 28/410
- Height
- 120,7 mm
Plastic cap, 28/410, black, shaped flip top
- Product colour
- Black
- Country of origin
- European Union
- Diameter
- 30 mm
- Thread type
- 28/410
- Height
- 23,3 mm
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.














