10% off everything in Base IngredientsStock up

+421 950 333 113info@handymade.store

Bottles only

Clear Glass Bottle, 30 ml, 128 pcs

The 30 ml glass bottle with an 18/410 neck finish is packaging for small quantities of cosmetics. full description

AvailabilityIn stock · last 3 packs
Product codeO18SP030_PLATO
€42.30incl. VAT

Lowest price in the last 30 days: €42.30

What's in the set

Product description

The 30 ml glass bottle with an 18/410 neck finish is packaging for small quantities of cosmetics. The clear glass shows the contents and their colour, so it is suitable for facial serums, facial and body oils, blends of essential oils in a carrier oil, or herbal tinctures, where you want the contents to be visible. The volume matches a typical serum or oil elixir pack, customer samples, and products that are used up within a few weeks.

The bottle is sold in a pack of 128, which suits small batches as well as production for your own brand. The packaging is suitable for use with cosmetic products and meets the relevant legislative requirements; the declaration of conformity is available with the product.


What the bottle is suitable for

  • Facial serums and oils – the clear glass shows the colour of the oil and any added flowers or herbs; the contents are dispensed with a dropper or a pump, depending on consistency.
  • Essential oil blends and tinctures – glass does not react with essential oils or alcohol; this applies to alcohol-based tinctures as well as facial toners.
  • Water-based toners and hydrosols – at 30 ml this is usually a travel or trial size, for which a fine mist sprayer with the same neck finish is suitable.
  • Samples and lab tests – the packaging is also available in technical grade, so it is suitable for storing batch samples and testing the stability of a formulation.

Volume and filling

The nominal volume is the amount the bottle is intended to hold with normal filling. The total brimful volume is the physical volume up to the neck. The difference between them is a reserve for the closure, dropper or pump, and for the expansion of the contents when the temperature changes. Therefore, fill the bottle up to the nominal volume, not to the brim. With a dropper, the reserve is needed above all so that the glass tube fits into the bottle and the contents do not overflow when you close it.

Before the first filling, wash the bottles, disinfect them with isopropyl alcohol or ethanol, and leave them to dry completely neck down. Residual water in an oil-based product is a common reason why cloudiness or spoilage appears in a small pack.


Closures

Closures with the same neck finish fit the bottle, namely droppers, pumps, fine mist sprayers and caps with an 18/410 thread. In the Handymade range you will also find ready-made bottle and closure combinations. If you choose the closure yourself, we recommend checking the tightness and dispensing with your specific formulation, especially with thicker oils and products with a high alcohol content.


Good to know

Clear glass does not protect the contents from light. Oils prone to oxidation, products with vitamins, or products with essential oils are better kept in a box or out of direct sunlight, or you can choose amber or blue glass. Clear packaging makes sense where the colour of the product is part of its presentation and the product is used up quickly.

Glass tolerates heat better than plastic, but when filling, let the mixture cool at least partially. A sudden difference in temperature between a hot formulation and a cold bottle can damage the glass.

Glass is fragile and breaks if dropped on a hard surface. When packing larger batches into parcels, allow for padding between the bottles and do not let them knock against each other.

After thorough washing and disinfection, the bottles can be reused. Droppers and pumps with rubber or plastic parts are harder to clean after oily contents, so for reuse it makes sense to replace the closure and keep only the glass part. Discarded bottles belong in glass recycling; remove the closure before recycling.


Frequently asked questions

Does a clear 30 ml glass bottle protect the contents from light?
No, clear glass lets light through and does not protect the contents from it. It is therefore suitable for products that are used up quickly or are not sensitive to light, and for products where the colour of the contents should be visible. For oils prone to oxidation and formulations with active ingredients, amber or blue glass is more suitable, or storage in a box out of direct sunlight.
How much actually fits into a glass bottle with a nominal volume of 30 ml?
The bottle is intended to be filled with 30 ml; the total brimful volume is larger and you will find it in the product parameters. The difference serves as a reserve for the dropper or pump and for the expansion of the contents when the temperature changes. Filling to the brim causes overflow when closing, and the dropper tube does not fit into a full bottle without some of the contents being displaced.
Is an 18/410 glass bottle suitable for essential oils and alcohol-based tinctures?
Yes, glass does not react with essential oils, vegetable oils or alcohol, so it does not affect the contents and is not damaged by them. With these contents, the choice of closure is what matters. Choose a dropper or a cap with a seal resistant to the given ingredients, and test the tightness on a single piece before you fill the whole batch.
How do I prepare glass bottles before filling them with cosmetics?
Wash the bottles with warm water and a cleaning product, rinse them, disinfect them with isopropyl alcohol or ethanol, and leave them to dry completely neck down. Only then fill them. Residual water in an oil-based product or serum leads to cloudiness and shortens its shelf life. The same procedure applies when you reuse a bottle, but it is better to replace a closure with rubber parts.
Which closure suits a 30 ml glass bottle with an 18/410 thread?
Any closure with an 18/410 neck finish fits, that is a dropper, pump, fine mist sprayer or cap with the same thread. The choice depends on the consistency of the contents. For oils and serums, use a dropper or a pump; for water-based toners and hydrosols, a fine mist sprayer; for tinctures, a cap or a dropper. We recommend checking the dispensing and tightness of the chosen combination with your specific formulation.

Parameters

Product colour
Clear
Country of origin
India
Nominal capacity
30
Brimful capacity
35 ml
Diameter
33 mm
Thread type
18/410
Height
78,8 mm
Product material
Glass

Product documentation

PPWRPackaging Declaration (PPWR)
Glass bottle, clear, 18 mm, 30 ml · O18SP030PDF ↓
PDSProduct Data Sheet
Glass bottle, clear, 18 mm, 30 ml · O18SP030PDF ↓
DrawingTechnical drawing
Glass bottle, clear, 18 mm, 30 ml · O18SP030PDF ↓
Download all (ZIP)

3 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.