PLASTIC BOTTLES
Clear Plastic Bottle, Black Plastic Disc Top With Golden Aluminum Collar, 250 ml
Pack size100 ml150 ml200 ml250 ml500 ml
A clear PET plastic bottle with a capacity of 250 ml and a gold disc top cap make a ready-made set for liquid and medium-thick cosmetic products that are dispensed by squeezing the bottle: shower gels, shampoos,… full description
Lowest price in the last 30 days: €1.19
Save €0.01 with this set
Total for 1 pcs: €1.19
Quantities add up across all combinations of this bottle.
Product description
A clear PET plastic bottle with a capacity of 250 ml and a gold disc top cap make a ready-made set for liquid and medium-thick cosmetic products that are dispensed by squeezing the bottle: shower gels, shampoos, conditioners, body lotions, liquid hand soaps or massage oils. The clear plastic shows the colour and the level of the contents, so it suits products where the contents themselves should be visible. PET is lightweight and does not break, which you will appreciate in the shower and bathroom.
The cap combines aluminium and polypropylene, is gold with a black centre and has a 24/410 neck finish. It opens by pressing one side of the disc, the contents are squeezed out by gently pressing the bottle, and pressing the disc back closes the outlet. The set is declared suitable for contact with cosmetics.
What the set is suitable for
- Shower gels and shampoos – liquid to gel-like contents flow smoothly through the disc top opening and can be dispensed with one hand, which is an advantage in the shower compared with a screw cap.
- Body lotions and light creams – emulsions that can be squeezed out of the bottle are dispensed without touching them with your hands, and the cap stays clean.
- Liquid hand soaps – 250 ml corresponds to the usual size of a soap bottle by the sink. Unlike a pump, a disc top has no dip tube, so it does not need to be adjusted to the height of the bottle.
- Body and massage oils – the clear wall shows the colour of the oil, and the disc top lets you dispense a small amount without unscrewing the cap.
Dispensing with a disc top cap
The amount that comes out is controlled by how hard you squeeze the bottle. The PET wall is flexible, returns to its shape when released and draws air back in. Very thin, watery contents, for example toners or hydrosols, flow out quickly even with a light squeeze and may drip on their own when the disc is open and the bottle is turned upside down. Very thick creams, on the other hand, are difficult to push through the opening. A disc top works best with contents ranging from a liquid lotion to a thicker gel. Check how your particular formulation behaves, how well it seals and whether it leaks around the disc on one filled bottle before filling the whole batch.
Nominal and total volume
The nominal volume of 250 ml is the volume the bottle is designed for in normal filling. The brimful capacity is the physical volume up to the neck and is always slightly larger. The difference provides room for the cap, for the air that returns to the bottle when dispensing with a disc top, and for the expansion of the contents when the temperature changes. The bottle is therefore filled to the nominal volume, not to the brim.
When filling bottles with a disc top cap, leave free space above the liquid. A bottle filled to the neck cannot draw air back in after it is squeezed, and the contents will spurt out when it is opened for the first time.
Good to know
- Preparation before the first filling – wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and let them dry completely so that no residual water gets into the contents.
- Filling – let emulsions and gels cool to room temperature before filling. The bottle is intended for storage at 5–30 °C.
- Material resistance – do not expose the bottle to aggressive chemicals. For formulations with a high proportion of essential oils or alcohol, check how the plastic and the cap seal behave on a test piece over several weeks.
- Reuse – after thorough washing and disinfection, the bottle and the cap can be used again. A disc top is harder to clean than a smooth cap, so before the next filling take it apart, if the construction allows, and rinse the channel.
- Other closures – other closures with the same neck type also fit the 24/410 neck, and ready-made bottle + closure combinations are available in the Handymade range. If you make your own combination, check the seal and the dispensing with your specific formulation.
- Recycling – the bottle is made of PET, and the cap combines aluminium and PP. Before disposal, unscrew the cap from the bottle so that the materials are sorted separately.
Only the bottle on its own has a certificate for direct food contact. The cap does not have one, so the set as a whole is intended for cosmetics. Do not use it for homemade oils, syrups or infusions.
Frequently asked questions
Parameters
Plastic bottle, clear, 24/410, 250 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 250
- Diameter
- 50 mm
- Thread type
- GL24
- Height
- 164 mm
Black Plastic Disc Top With Golden Aluminum Collar, 24/410
- Country of origin
- European Union
- Diameter
- 28 mm
- Thread type
- 24/410
- Height
- 29 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.






























































