PLASTIC BOTTLES
Clear Plastic Bottle, Black Pump with Smoky Overcap, 100 ml
The plastic bottle with pump, 100 ml, is a set for dispensing liquid and semi-liquid cosmetic products: serums, fluids, face and body lotions or liquid soaps. full description
Lowest price in the last 30 days: €1.53
Save €0.01 with this set
Total for 1 pcs: €1.53
Quantities add up across all combinations of this bottle.
Product description
The plastic bottle with pump, 100 ml, is a set for dispensing liquid and semi-liquid cosmetic products: serums, fluids, face and body lotions or liquid soaps. The bottle is made of PET, is lightweight and, unlike glass, does not break when dropped, so it suits both the bathroom and a travel bag. Through the clear wall you can see the colour of the contents and how much is left in the bottle. The black pump closes the 24/410 neck and dispenses a small, repeatable dose with a single press. The set therefore works best for products that are applied in small amounts.
What it is suitable for
- Serums and fluids – one press dispenses approximately 0.2 ml, so you can dose without pouring and without your fingers touching the contents.
- Light emulsions and lotions – the pump draws up liquid and medium-thick textures reliably. With thick creams, we recommend checking that the contents rise through the dip tube.
- Liquid soaps and facial cleansing gels – the 100 ml volume suits samples, trial batches and smaller packs for the family.
- Massage and body oils in a small pack – with an oil-based filling, first test how well the pump seals and whether any drops remain on the head after pressing.
How the set works
The pump screws onto the bottle like an ordinary cap. A dip tube reaches into the bottle, and the head is pressed with a finger. Before first use, prime the pump by pressing it several times until the mechanism fills with the product. The smoky overcap protects the head from dust and prevents accidental pressing during transport, and it also lets you see whether the head is clean. Always put the overcap on before longer storage or travel.
A small amount of product remains at the bottom of the bottle that the tube can no longer reach. Take this into account with more expensive serums. The remainder can be tapped out after unscrewing the pump.
Fill the bottle up to the nominal volume of 100 ml, not to the brim. After the pump is fitted, the dip tube and the body of the mechanism take up space, and without a reserve the contents would overflow through the neck when screwing it on.
Nominal and total volume
The nominal volume is the amount the bottle is intended for under normal filling. The total brimful volume is the physical volume up to the neck and can be found in the parameters. The difference between them provides a reserve for the pump, for the air above the surface and for slight expansion of the contents with temperature changes. If you sell the product, the declared quantity is the nominal volume.
Good to know
Light. A clear bottle does not protect the contents from light. Store products containing vegetable oils, vitamins or sensitive active ingredients in the dark, or choose dark packaging for them.
Chemical resistance. Do not expose the bottle to aggressive chemicals or heat, and let a hot product cool before filling. For fillings with concentrated essential oils, a higher proportion of alcohol or solvents, we recommend first filling one bottle and observing it for several weeks.
Preparation before filling. Wash the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Pump the disinfectant solution through the pump several times, then clean water, so that no residues remain in the tube. Repeat the same procedure for every further filling. A pump in which old product has dried can often no longer be cleaned reliably.
Suitability for cosmetics. Based on the technical documentation, the bottle is declared as suitable for contact with cosmetic products, and you will find the declaration of conformity with the product. We do not have such a declaration available for the pump, so we do not declare the set as a whole as approved for contact with cosmetics. If you use your own recipe, check how the pump performs with that particular formulation. The set is not intended for contact with food.
When the bottle travels in luggage, a change in pressure may push the product out through the head. Do not fill the bottle fully up to the nominal volume, put the overcap on and place the bottle in a resealable bag.
Other closures. All closures with a 24/410 neck finish from the Handymade range fit the bottle. Ready-made combinations of the bottle with a cap, dropper or sprayer have their own description. With your own combination, check the tightness and dispensing with your product.
Recycling. The bottle is marked with the material code PET 1 and belongs with plastics. Unscrew the pump before disposal and dispose of it separately.
Frequently asked questions
Parameters
Clear plastic bottle, 24/410 neck, 100 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 100
- Brimful capacity
- 104 ml
- Diameter
- 40 mm
- Thread type
- 24/410
- Height
- 106 mm
Plastic dispenser, black with smoke cap, 24/410
- Country of origin
- European Union
- Dose
- 0,2 ml
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.















































