PLASTIC BOTTLES
Clear Plastic Bottle, Black Pump with Smoky Overcap, 150 ml
A clear 150 ml PET bottle and a black pump with a smoky overcap make a ready-to-use set for products that are dispensed by pressing: body lotions, facial emulsions, liquid hand soaps, thinner shampoos and conditioners,… full description
Lowest price in the last 30 days: €1.64
Total for 1 pcs: €1.64
Quantities add up across all combinations of this bottle.
Product description
A clear 150 ml PET bottle and a black pump with a smoky overcap make a ready-to-use set for products that are dispensed by pressing: body lotions, facial emulsions, liquid hand soaps, thinner shampoos and conditioners, or shower gels. The clear plastic shows the colour of the contents and how much is left. The bottle is light and, unlike glass, does not break, so it holds up in the bathroom, in the shower and in a travel bag. The smoky overcap covers the pump head and protects it from dust and from accidental pressing during transport.
How the set works
The pump screws directly onto the bottle neck with a 24/410 neck finish. One press dispenses approximately 0.2 ml of product, so you set the amount by the number of presses. The contents are dispensed without opening the bottle, so fingers and shower water do not get into the rest of the product and it is less likely to become contaminated.
When using the pump for the first time, press it several times without product until the dip tube fills and the pump delivers a full dose. With very thick creams, butters or products containing particles (scrubs, preparations with salt or sugar crystals), pressing can become harder or the tube can clog. We recommend testing how the pump behaves with your specific formulation on a small sample before you fill a whole batch.
Fill the bottle up to the nominal volume of 150 ml, not to the brim. Space must remain above the surface for the submerged dip tube of the pump and for air, otherwise part of the contents will overflow when you screw on the closure.
Nominal and brimful volume
The nominal volume is the amount the packaging is designed for under normal filling. The brimful volume is the physical volume of the bottle up to the neck, and you will find it in the parameters. The difference between the two values leaves room for the closure, the dip tube of the pump and the expansion of the contents when the temperature changes. Always fill up to the nominal volume.
What it is suitable for
- Body lotions and facial emulsions – liquid to medium-thick O/W emulsions, which the pump draws up and measures out without problems.
- Liquid soaps and cleansing gels – at the sink the contents are dispensed with one hand and the bottle stays closed.
- Shampoos and conditioners – best suited to thinner formulations; test thick conditioners before filling.
- Massage and body oils – vegetable oils are dispensed cleanly, without dripping down the walls of the bottle.
- Samples and travel packs – the 150 ml volume and the durability of the plastic suit packaging that is carried around often.
Good to know
Before first filling, wash the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water in the tube or at the bottom of the bottle dilutes the product and needlessly burdens the preservative system.
Clear PET does not protect the contents from light. Store products containing light-sensitive ingredients away from direct sunlight, or choose darker packaging for them.
The bottle is intended for cosmetics and common cosmetic raw materials, not for aggressive chemicals. For formulations with a higher content of essential oils, alcohol or other solvents, we recommend checking that the material does not change in appearance or tightness, for example by filling a test bottle and leaving it for several weeks.
The bottle has a declaration of suitability for contact with cosmetic products. The pump does not have such a declaration, so the set as a whole is not declared as suitable for contact with cosmetics. We recommend checking the compatibility of the pump with your specific formulation. The set is not intended for contact with food.
Once empty, the packaging can be washed and reused. Rinse the pump with warm water by pumping it through several times to remove residues of the previous product from the tube and the head. The PET bottle belongs in sorted plastic waste. Before recycling, unscrew the pump from it and sort it separately.
If the pump does not suit you, other closures with the same type of thread can also be used on the 24/410 neck. You will find them, together with ready-made combinations, in the Handymade range. For your own combination, we recommend checking the tightness and dispensing with your specific contents.
Frequently asked questions
Parameters
Plastic bottle, clear 24/410, 150 ml
Plastic dispenser, black with smoke cap, 24/410
- Country of origin
- European Union
- Dose
- 0,2 ml
Product documentation
- PDSProduct Data Sheet
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.














































