Spend over €100 for discounted shipping!

+421 950 333 113[email protected]
Cart0

CLOSURES

Plastic cap for fabric softener bottle, type 2, blue-transparent

Plastic cap for fabric softener bottle, type 2, blue-transparent

The blue-transparent plastic cap type 2 is a closure designed for the fabric softener bottle from the Handymade range. It is suitable for packaging home care products that are resealed after each use. full description

AvailabilityIn stock · 97 pcs
Product codeOVV42APM2
€0.20incl. VAT

Lowest price in the last 30 days: €0.20

Volume pricing
1–199 pcs€0.20Your price
200–999 pcs€0.18−8 %
1000–4999 pcs€0.17−15 %
from 5000 pcs€0.15−25 %

Total for 1 pcs: €0.20

Product description

The blue-transparent plastic cap type 2 is a closure designed for the fabric softener bottle from the Handymade range. It is suitable for packaging home care products that are resealed after each use. The translucent blue colour helps to instantly distinguish individual products, for example different scents of the same fabric softener.

What the cap is suitable for

The cap is supplied individually as one piece. It can be used when assembling your own packaging or as a replacement for a lost or damaged closure.

  • Fabric softeners and laundry detergents – laundry gels and other liquid to slightly viscous products that are poured from the bottle and the container is opened repeatedly.
  • Household cleaning products – liquid cleaners at standard dilution.
  • Refill use – the bottle with cap can be washed and refilled after emptying.

Choosing by bottle

The designation type 2 distinguishes this cap from other versions in the range. Before ordering, we recommend verifying that it matches your fabric softener bottle. Bottles with the same neck type and ready-made bottle + cap combinations are available in the Handymade range.

When combining with a different bottle of your own choice, we recommend checking the seal. Leave the filled and closed bottle on its side for several hours and check that the contents do not leak.

Good to know

Preparation before first use. Before filling, wash the cap, disinfect it and allow it to dry completely. Any water trapped in the cap would enter the product and unnecessarily burden its preservation.

Temperature. Plastic tolerates heat less well than glass. Always fill the finished product only after it has cooled down, otherwise the cap may deform and no longer seal.

Filling the bottle. The bottle is filled to the nominal volume, meaning the volume it is designed for under standard filling conditions. The total volume to the brim is the physical volume up to the neck. The difference between the two is a reserve for the closure and for the expansion of the contents when the temperature changes.

For products with a higher proportion of essential oils, fragrance compositions or solvents, carry out a test on a single piece. Check whether the cap changes to the touch, loses transparency or becomes loose.

Recycling. The cap is made of plastic and should be placed in sorted plastic waste when no longer in use.

Frequently asked questions

Which bottle is the plastic cap type 2 suitable for?
Cap type 2 is designed for the fabric softener bottle from the Handymade range. The key factor is the match between the bottle neck and the cap, so before ordering, verify that this version is the correct one for your bottle. When used with a bottle from a different source, the seal is not guaranteed and must be tested on a filled container.
Can the plastic cap for the fabric softener bottle be used repeatedly?
Yes, the cap can be used repeatedly as long as it is undamaged and seals on the bottle. Before each new fill, wash it and allow it to dry so that residues of the previous contents or water do not get into the fresh product. If the cap is cracked, deformed or has stopped sealing, replace it with a new one.
Is the plastic cap suitable for fabric softener containing essential oils?
Yes, the cap is used with finished fabric softener at a standard fragrance level. However, data on resistance to concentrated essential oils and solvents is not available. For more heavily fragranced products, it is advisable to carry out a test: leave the filled bottle sealed for several weeks and check whether the plastic has changed.
How to clean the plastic cap before filling with fabric softener?
Simply wash the cap in warm water with a cleaning agent, rinse thoroughly and disinfect with isopropyl alcohol or ethanol. Then allow it to dry completely in a clean place. Do not use boiling water, as the plastic may deform at high temperatures and the cap would no longer seal on the bottle.
Why is the fabric softener bottle not filled to the brim?
The fabric softener bottle is filled to the nominal volume, not to the brim, because the space below the neck serves as a reserve. Part of the space is taken up by the closure, and the liquid contents expand at higher temperatures. An overfilled bottle will easily spill when being closed or at first opening, and the contents will get onto the neck and under the cap.
REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.